Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 2 [All]   Go Down

Author Topic: Geometry Setup at WIM franchise  (Read 2118 times)

0 Members and 1 Guest are viewing this topic.

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Geometry Setup at WIM franchise
« on: 25 January 2015, 21:43:27 »
Suggested setup:

Front:
Camber: -1deg 40' both sides
Caster: 5deg both sides
Toe: 0deg 10'

Rear:
Camber -1deg 50'
Toe: 0deg 25'


I think from reading on here these are the VX values and I should ask for less Camber on the front, -1deg 10'? I have sent a PM to WIM but as the work is being done in the morning thought I'd ask the panel.

Many thanks

Steve

PS it really can't be any worse than it was!
« Last Edit: 25 January 2015, 21:51:42 by steve6367 »
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

05omegav6

  • Guest
Re: Geometry Setup at WIM franchise
« Reply #1 on: 25 January 2015, 21:48:37 »
Miles out :o
Logged

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #2 on: 25 January 2015, 21:51:16 »
All of it?

Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

05omegav6

  • Guest
Re: Geometry Setup at WIM franchise
« Reply #3 on: 25 January 2015, 21:52:39 »
Logged

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #4 on: 25 January 2015, 22:00:32 »
Thanks - I'll see if we can go for those values in the morning then  :y

Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #5 on: 25 January 2015, 22:08:19 »
Assume the toe value is 'total toe' of 0deg 05'?
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

05omegav6

  • Guest
Re: Geometry Setup at WIM franchise
« Reply #6 on: 25 January 2015, 22:25:51 »
Both front and rear toe should toe in, and camber is negative, not positive.

Rear settings are a compromise as camber and toe are one adjustment, but thrust angle MUST be 0 :y
Logged

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #7 on: 25 January 2015, 22:31:49 »
Quote from: Taxi Al on 25 January 2015, 22:25:51
Both front and rear toe should toe in
, and camber is negative, not positive.

Rear settings are a compromise as camber and toe are one adjustment, but thrust angle MUST be 0 :y

so 0deg 5' toe in each side or total?

(I'm probably bring thick, sorry!)
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

05omegav6

  • Guest
Re: Geometry Setup at WIM franchise
« Reply #8 on: 25 January 2015, 23:24:34 »
In total :y
Logged

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #9 on: 26 January 2015, 09:35:03 »
This mornings news is that WIM don't work with any other garages anymore, that website info is out of date.  :-\
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5531
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #10 on: 26 January 2015, 09:42:11 »
Just gonna phone them and book mine in....just had new 'bones' on the 2.5 estate :y
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5531
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #11 on: 26 January 2015, 10:00:12 »
Can't be too busy at WIM...offered me 1pm, 2pm or 3pm today. Took the 1pm appointment :y
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #12 on: 26 January 2015, 10:14:22 »
They were very helpful when I spoke to them this morning, but unforutantly for me they did advise the website is wrong and they no longer work with other garages. Offered to take a look at the print out when its done locally though, so will see what they think  :y
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5531
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #13 on: 26 January 2015, 14:59:35 »
Just got back from WIM. They remembered you, Steve. And I confirm, they do not now work with other garages :y

Our Omega price still remains at £72 inc vat :y
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

Weds

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Chatham, Kent
  • Posts: 653
  • My other hobby
    • Mercedes E class 350 CDi
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #14 on: 26 January 2015, 17:22:47 »
Had mine done at WIM last tuesday, camber and toe well out after wishbone change. Now tracking lovely..
Logged

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #15 on: 26 January 2015, 18:02:26 »
Quote from: terbert on 26 January 2015, 14:59:35
Just got back from WIM. They remembered you, Steve. And I confirm, they do not now work with other garages :y

Our Omega price still remains at £72 inc vat :y

Thats a good price - to be fair my car now drives lovely, wheel straight, no pulling or darting around the road at every inperfection. That maybe down to the new wishbones though I guess. The setting used are nother like the WIM ones. When I picked it up they did say they would be happy to put 'my' setting in if I'm not happy so may drive it for a couple of days and think about it. I guess tyre scrubbing could be an issue even though it seems to handle ok.  :-\
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5531
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #16 on: 26 January 2015, 19:03:53 »
Here is my readout today....

Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

biggriffin

  • Omega Lord
  • *****
  • Offline Offline
  • huntingdon, Hoof'land
  • Posts: 9758
    • Vectra in a posh frock.
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #17 on: 26 January 2015, 20:17:59 »
Front camber. 1'20 front track 0 to parallel, castor 5'
Rear camber 1'30,rear track 0, total of 0' thrust angle.
 If they can get the front camber to 1'15 better.
Set tyre pressures to 32 front 35 rear.

 :o
Logged
Hoof'land storeman.

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #18 on: 26 January 2015, 22:41:24 »
So taking front camber how does the table above relate to the published (on here) WIM values?

 I m probably being thick, but it looks totally different to me.....

(My head hurts now)  :-[
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5531
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #19 on: 27 January 2015, 09:32:08 »
You and me both, Steve. I have sent a pm to Al and he is going to look something up for me when he gets back. Its all beyond me, mate :(

I am taking it by biggriffins remarks and Taxi Al's pm to me that although mine has been done, its way out !!!!!
« Last Edit: 27 January 2015, 09:34:53 by terbert »
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #20 on: 27 January 2015, 09:54:14 »
Indeed, thats what I don't understand as your WIM setup looks a bit like mine even though mine is nothing like the values that Al posted!

How hard can it be!?

My setup if any use to compare:

« Last Edit: 27 January 2015, 10:03:21 by steve6367 »
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

05omegav6

  • Guest
Re: Geometry Setup at WIM franchise
« Reply #21 on: 27 January 2015, 10:50:28 »
Quote from: steve6367 on 27 January 2015, 09:54:14
Indeed, thats what I don't understand as your WIM setup looks a bit like mine even though mine is nothing like the values that Al posted!

How hard can it be!?

My setup if any use to compare:


Your front end is better, but the nsf and osr camber are well off...

Front toe is much better, rear toe camber is a compromise, because ALL the adjustments are done on the one adjuster... but even so :-\

What state are either of your rear subframe bushes in?
Logged

steve6367

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 1613
    • View Profile
Re: Geometry Setup at WIM franchise
« Reply #22 on: 27 January 2015, 12:06:11 »
Quote from: Taxi Al on 27 January 2015, 10:50:28
Quote from: steve6367 on 27 January 2015, 09:54:14
Indeed, thats what I don't understand as your WIM setup looks a bit like mine even though mine is nothing like the values that Al posted!

How hard can it be!?

My setup if any use to compare:

Your front end is better, but the nsf and osr camber are well off...

Front toe is much better, rear toe camber is a compromise, because ALL the adjustments are done on the one adjuster... but even so :-\

What state are either of your rear subframe bushes in?

When I looked over the suspension and decide to replace the bits I did, I thought they looked ok but that was just looking so not sure that is really a good test.

Steve
Logged
2.2 CDX Estate (broken), 2.5 CD Salon, 2.5 CD Estate LPG

05omegav6

  • Guest
Re: Geometry Setup at WIM franchise
« Reply #23 on: 27 January 2015, 12:11:34 »
Summat is skewed, and a failing rear subframe bush would allow the rear suspension to twist slightly...
Back the car onto ramps and remove the cover plate and centre bolt, any cracking or splits and the bush needs replacin...  Only remove one side at a time though... :y
« Last Edit: 27 January 2015, 12:13:58 by Taxi Al »
Logged
Pages: 1 2 [All]   Go Up
« previous next »
 

Page created in 0.025 seconds with 21 queries.