Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[terry paget]

I removed the plenum, opened the harness container, and looked in vain for another plug. Realised that the one I rejected last night must be the lead for the crank sensor. What I had done was stuff the plug in the wrong way up, jammed it, and damaged it removing it. I repaired it with a cable tie, and to avoid a recurrence cut a new hole in the harness box handier for the new route of the cable. I fitted a new crank sensor, and oiled the ICV. Took it for a 10 miles test run, seemed fine.
I could not achieve Doc G's plenum off 5 minutes, on again 2 minutes. Must be out of practice.
Pic of repaired plug and rerouted cable

[BazaJT]

Must admit I can't do plenum off in 5mins either,although it's not too long a job.Glad you got this one sussed

[dave the builder]

well done Terry, got there in the end 
even if you did stray from the path on the way