Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ...Matski... on 16 February 2011, 09:11:12

Title: Facelift door
Post by: ...Matski... on 16 February 2011, 09:11:12

Hi all,

I had a dented passenger door on a 99 omega. I was wondering if a 2000 (facelift) door will fit as I think I've found one in the same color (z144 met gray)

Thanks in advance,
Matt.

Title: Re: Facelift door
Post by: RobG on 16 February 2011, 09:18:59

Yep, it`ll fit.

Title: Re: Facelift door
Post by: ...Matski... on 16 February 2011, 09:23:56

Great thanks.

I take it it's just the mirror and card that are different? Presumably I could get the other mirror too?

Title: Re: Facelift door
Post by: RobG on 16 February 2011, 09:26:13

You`ll have to swap your door loom over (easy enough) unless the donor door is from an Elite.

Title: Re: Facelift door
Post by: ...Matski... on 16 February 2011, 09:28:45

Thats grand I'll swap the guts out. Will the older loom work with the new style mirrors?

Lastly are the chrome trims possible to swap?

Title: Re: Facelift door
Post by: RobG on 16 February 2011, 09:39:13

Quote

Thats grand I'll swap the guts out. Will the older loom work with the new style mirrors?

Lastly are the chrome trims possible to swap?

If you mean the bump strip.....the facelift is held on by a small torx either end & slides off, yours will be bonded on, will come off with time, patience & heat. Don`t forget to use your speaker as your`s being an Elite will probably have Bose. Mirror will work

Title: Re: Facelift door
Post by: RobG on 16 February 2011, 09:41:51

Link for removing your door trim
http://www.omegaowners.com/forum/YaBB.pl?num=1192324445

Title: Re: Facelift door
Post by: ...Matski... on 16 February 2011, 09:46:01

Nice one thanks for your help.

Getting the trim off to refit looks tricky!

Title: Re: Facelift door
Post by: RobG on 16 February 2011, 09:47:40

Quote

Nice one thanks for your help.

Getting the trim off to refit looks tricky!

May be worth contacting VX getting cost for replacement :-/

Title: Re: Facelift door
Post by: ...Matski... on 16 February 2011, 09:53:13

I'll have a go first then spend out when I stuff it up!