Ello peeps
Apologies for the delay in updating this but its silly season in retail and quite frankly, the cars hardly been touched
Right, all the rear brakes have been totally rebuilt with new parts.
All put back together and the handbrake works perfectly but we still have major problems with what I can only describe as "No Pedal"
All the rear brakes have been drained of what little fluid was left and new Dot 4 pushed all the way through to the point of all we now get is virgin fluid and no bubbles but regardless of the engine running of not, I get no brakes (or pedal) until I have pumped the peddle down at least twice
I have also bled the front callipers to the point of no air and steady fresh fluid there too.
Again the peddle is the same.
I have tried to actuate the abs pump using that code reader which shall never be mentioned by name with the reservoir cap off to see if I have a air lock in the pump but it made no difference
Anybody have a clue what the problem is ?
Apologies in advance if I don't reply quickly.
I very rarely get near the pc at the moment but I will answer asap