Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: 2boxerdogs on 05 December 2013, 20:34:41

Title: Central locking playing up.
Post by: 2boxerdogs on 05 December 2013, 20:34:41

Hi , slight problem with the 2.2, used the remote as usual to lock it, it then unlocked straight away tried again & same thing happened..  but drivers door stayed locked so unlocked drivers door with key & then locked car with key.Used remote again all opened except drivers door any ideas where the problem is ?

Title: Re: Central locking playing up.
Post by: RobG on 05 December 2013, 21:09:58

Quote

any ideas where the problem is ?

Driver`s door lock motor/solenoid donald

Title: Re: Central locking playing up.
Post by: blackviper90210 on 06 December 2013, 20:37:56

Whereabouts are you Tilbo? :)

Title: Re: Central locking playing up.
Post by: 2boxerdogs on 06 December 2013, 23:13:03

Hi Blackviper, Spalding Lincs.

Title: Re: Central locking playing up.
Post by: blackviper90210 on 07 December 2013, 15:21:41

Quote from: Tilbo on 06 December 2013, 23:13:03

Hi Blackviper, Spalding Lincs.

Shame yr not closer. Another oofer local to me showed me how to change the door locks and solenoids on mine recently. If you were closer, I could of helped you do yours :-\

Title: Re: Central locking playing up.
Post by: allen25 on 08 December 2013, 12:03:27

Quote from: blackviper90210 on 07 December 2013, 15:21:41

Quote from: Tilbo on 06 December 2013, 23:13:03

Hi Blackviper, Spalding Lincs.

Shame yr not closer. Another oofer local to me showed me how to change the door locks and solenoids on mine recently. If you were closer, I could of helped you do yours :-\

Although I did help Blackviper with the Torx tools, he'd pretty much stripped the door card out and got to the mechanism before I'd got my tool set out! If you decide to replace it yourself, the Torx socket bit required for the bolts in the door (3 of around the lock in the door frame) is a T40...is on mine & Blackviper's. There are some 'clip over' plastic fittings for the connecting rods so it is a good idea to note what clips where before pulling the old unit out.

Title: Re: Central locking playing up.
Post by: 2boxerdogs on 08 December 2013, 19:18:27

Quote from: blackviper90210 on 07 December 2013, 15:21:41

Quote from: Tilbo on 06 December 2013, 23:13:03

Hi Blackviper, Spalding Lincs.

Shame yr not closer. Another oofer local to me showed me how to change the door locks and solenoids on mine recently. If you were closer, I could of helped you do yours :-\

Thanks for the offer, but yes too far will have a look at it in the spring too dark & damp at the moment..

Title: Re: Central locking playing up.
Post by: 2boxerdogs on 08 December 2013, 19:20:50

Quote from: allen25 on 08 December 2013, 12:03:27

Quote from: blackviper90210 on 07 December 2013, 15:21:41

Quote from: Tilbo on 06 December 2013, 23:13:03

Hi Blackviper, Spalding Lincs.

Shame yr not closer. Another oofer local to me showed me how to change the door locks and solenoids on mine recently. If you were closer, I could of helped you do yours :-\

Although I did help Blackviper with the Torx tools, he'd pretty much stripped the door card out and got to the mechanism before I'd got my tool set out! If you decide to replace it yourself, the Torx socket bit required for the bolts in the door (3 of around the lock in the door frame) is a T40...is on mine & Blackviper's. There are some 'clip over' plastic fittings for the connecting rods so it is a good idea to note what clips where before pulling the old unit out.

Thanks for the advice..

Title: Re: Central locking playing up.
Post by: Steve B on 08 December 2013, 23:18:43

Think door handle was 10mm socket  :y dead easy job

http://www.omegaowners.com/forum/index.php?topic=90543.0

Title: Re: Central locking playing up.
Post by: blackviper90210 on 09 December 2013, 21:28:06

Quote from: Tilbo on 08 December 2013, 19:18:27

Quote from: blackviper90210 on 07 December 2013, 15:21:41

Quote from: Tilbo on 06 December 2013, 23:13:03

Hi Blackviper, Spalding Lincs.

Shame yr not closer. Another oofer local to me showed me how to change the door locks and solenoids on mine recently. If you were closer, I could of helped you do yours :-\

Thanks for the offer, but yes too far will have a look at it in the spring too dark & damp at the moment..

Your welcome. If its not been sorted and your ever popping this way, or vice versa, we'll get together and fix it :y

Title: Re: Central locking playing up.
Post by: 2boxerdogs on 10 December 2013, 11:53:11

Thanks, that would be great .

Title: Re: Central locking playing up.
Post by: Toledodude1973 on 10 December 2013, 18:45:15

I've got exactly the same problem Tilbo whats the cost of the motor any idea?

Title: Re: Central locking playing up.
Post by: 2boxerdogs on 10 December 2013, 22:13:57

 Hi , no idea have not had any time to price anything up yet..

Title: Re: Central locking playing up.
Post by: omegod on 10 December 2013, 22:50:11

They are usually 10-15 quid from the breakers, I had a load but inadvertently fried them all whilst testing them :-[