Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega Electrical and Audio Help / electrical problem

« on: 20 January 2020, 14:32:00 »

As advised changed lighting switch remained same Changed indicator stalk same problem lights stay on,has anybody experienced this problem
and solved it,i would love to hear from them.MOT in a few weeks time so starting to worry.Thanks in advance

2

Omega Electrical and Audio Help / electrical problem

« on: 14 January 2020, 18:51:45 »

Hello everyonei hope you can help me with my electrical problem on my 1997 Omega 20ltr auto.
I put the key into ignition and turn to position one...facia lights come on...main beam light comes on
right indicator light comes on....rear fog light comes on....start car and drive no problem.
Now put main beam on light goes out...put indicator on light goes out...rear fog on light goes out
They seem to be working in reverse.
Any ideas(i would like to solve and do whatever is reqd to rectify)instead of putting it into you know where.

3

Omega General Help / timing belt marks

« on: 04 September 2016, 17:36:41 »

Hello there,In the thoes of renewing belt w/pump tensioner pulleys on my 1998 20ltr auto,did the stripping down ect
locked off cams,tippexed marks and bottom pulley(tensioner broken)
   So i removed belt which was a little marked,checked to see any damage then i noticed the inlet cam straight mark
but exhaust was triangle on cover and cam the straight mark was 10 notches to the left.
I put on new tensioner and reassembled and turned engine by hand ok Q: is the triangle on cover and cam correct
or could the exhaust cam jumped backwards 10 notches.
Thank you all in advance