Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Hiace2222 on 20 June 2018, 17:14:57

Title: Omega flat battery
Post by: Hiace2222 on 20 June 2018, 17:14:57

Battery went flat and obviously the radio is “safe “ , fitted new battery and left ignition on still
Showing safe ???? The radio is a standard cdr2005 Siemens vdo any ideas

Title: Re: Omega flat battery
Post by: TheBoy on 20 June 2018, 17:45:24

Ign on (important)
Radio off (important)
Press and hold AS, and turn radio on via its on/off switch (not via ign)
When it beeps almost instantly, release AS, and whack in code using buttons 1-4, then press and hold AS until it beeps


If it doesn't accept code, don't repeat, as clearly you have wrong code, and you'll get yourself in further trouble.

Title: Re: Omega flat battery
Post by: Alnico Blue on 20 June 2018, 19:24:24

Quote from: Hiace2222 on 20 June 2018, 17:14:57

Battery went flat and obviously the radio is “safe “ , fitted new battery and left ignition on still
Showing safe ???? The radio is a standard cdr2005 Siemens vdo any ideas

Nothing on your post  says you have tried to enter the code though :-\ :-\

But if you have & it did not accept it . . .probably wrong code. . as TB says  each attempt will get you an ever increasing  wait before you can attempt it again.  You have up to 10 attempts I believe   . . then you are in trouble with it   :'( :'(

Title: Re: Omega flat battery
Post by: Hiace2222 on 23 June 2018, 23:34:59

Ign on (important)
Radio off (important)
Press and hold AS, and turn radio on via its on/off switch (not via ign)
When it beeps almost instantly, release AS, and whack in code using buttons 1-4, then press and hold AS until it beeps


Tried that and it worked , thanks

Title: Re: Omega flat battery
Post by: Alnico Blue on 24 June 2018, 10:55:11

Quote from: Hiace2222 on 23 June 2018, 23:34:59

Ign on (important)
Radio off (important)
Press and hold AS, and turn radio on via its on/off switch (not via ign)
When it beeps almost instantly, release AS, and whack in code using buttons 1-4, then press and hold AS until it beeps


Tried that and it worked , thanks

Splendid  . . . .  well done  . . . .another satisfied customer   ;D ;D ;D