Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: x25xe caravan transmission conversion

« on: 06 February 2019, 05:40:04 »

Sorry for the delayed response,

Transmission has been repaired/overhauled 2 times already, almost all omegas here have the same problem

starts fine and then jolts or jerks then a transmission fault shows on the display. it seems its running on 3rd gear when the error happens.

we don't have a supply of ar35s here unless theres a bmw counterpart.

the opels in the philippines are the last of the mohicans here and we dont have much resources for parts and used items.

Thank you and very much appreciated your response.

2

Omega General Help / x25xe caravan transmission conversion

« on: 10 December 2018, 14:06:42 »

Hi everyone,

Has anybody converted their opel b caravan with x25xe auto tranny to manual tranny? I am done with the auto tranny with all its problems. Also is there an alternative to the getrag r25 or 28 form other car makes or brands? Limited to the availibility of the getrag tranny here in the Philippines.

Thanks in advance.

3

Omega General Help / Re: Wheel Tire Combination and Alignment

« on: 26 September 2015, 01:51:10 »

Super thank you sir!

4

Omega General Help / Wheel Tire Combination and Alignment

« on: 25 September 2015, 05:56:26 »

September 25, 2015


Hi to all,

What is the best fit and size for a tire-wheels combination for a V6?

for 17s

for 18s

and any adjustments on toe and camber if stock wheels are changed?


**considering that the suspension is stock


Thanks in advance

5

Omega Electrical and Audio Help / Re: Rebuilding issues

« on: 25 September 2015, 02:57:14 »

Thanks guys

The culprit was the tailgate door wasn't closing well due to deformed weatherstrip.

6

Omega Electrical and Audio Help / Rebuilding issues

« on: 28 August 2015, 18:06:13 »

August 29, 2015


Hi to all,

Im currently in the process of rebuilding my Omega Wagon and I have noticed the following:

1. ALL window button switches including the doors are always illuminated even if the engines off thus the battery might get drained
2. When I start the engine there's static coming from the rear speakers

Thanks in advance

7

Omega General Help / Re: X25XE transplant

« on: 22 July 2015, 13:45:44 »

Yes it was sold here with the complete line unfortunately it was short lived as the distributor didnt have good after sales service until it closed down. They even rebadged it to chevrolets with the last batch. Pitty they are good cars but when the dealers closed they all became homeless making it as cheap as chips.

8

Omega General Help / Re: X25XE transplant

« on: 21 July 2015, 10:30:20 »

some updates:

9

Omega General Help / Re: X25XE transplant

« on: 18 July 2015, 00:47:58 »

Hi guys

Would you know where to order windscreen and back glass weather strips that can ship overseas? No source here in the Philippines.

Thank you again.

Just an update:
Paint prep

10

Omega General Help / Re: X25XE transplant

« on: 13 July 2015, 10:21:06 »

Omega now is undergoing body restoration



Did some surgery on the bottom door sills due to rust







Replaced Drivers Door from the donor sedan



Repaired battery tray



Once everything done will head out for paint restoration.

11

Omega General Help / Re: X25XE transplant

« on: 13 July 2015, 10:10:23 »

Thanks for the list of advise. Did the carb cleaner method and found that some seals were worn out. Redone the seals and some hoses and now idle has improved.

12

Omega General Help / Re: X25XE transplant

« on: 07 July 2015, 03:41:24 »

at idle start 600 rpm:
engine quite rough you can feel the vibration inside the car. engine moves left and right.

at idle on 1000 rpm:
still feel the vibration

at idle on 1500 rpm:
vibration lessens

at idle 2000 rpm:
no vibration

*no hesitation when increasing rpm
*no sudden drop of rpm when accelerator is released
*spark plugs are dry - though I might have the wrong ones, what is the standard?
*new rocker cover gaskets

13

Omega General Help / Re: X25XE transplant

« on: 06 July 2015, 10:38:32 »

Gentlemen,

A. Cutting out and MAF error issue:

I must say that I'm the happiest man alive!

I found the culprit - 1 of 4 wires of the MAF wiring loom was cut!

MIL lights off and NO errors!

Thanks guys!


B. Idling:

Idling is quite rough (could feel the little tremble inside the car) and as I increase the rpm - thoughts?

RPM is 600 at idle should I adjust the screw on the throttle body to increase it?


Thanks again guys

14

Omega General Help / Re: X25XE transplant

« on: 03 July 2015, 15:00:28 »

Yes will check the plugs. Are there values to be checked with a multimeter with the MAF plug?

Heres the wagon now

15

Omega General Help / Re: X25XE transplant

« on: 03 July 2015, 14:25:14 »

Hi Bojan,

CEL is still ON and little rough idling. Yes I have tried exchanging but still the same. Ill try cleaning the sensors tomorrow and see what happens. Is there a way to check them?

Cheers