1
Omega General Help / Re: Front coil spring sizes???
« on: 12 April 2022, 19:26:59 »
Saloon, 2.5 v6
- 16 April 2024, 05:25:36
- Welcome, Guest
News:
Please check the Forum Guidelines at the top of the Newbie section
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Omega General Help / Re: Front coil spring sizes???
« on: 12 April 2022, 18:58:24 »
We’ll explained!, I should have said I’m replacing rear shocks too, Sachs all way round so any suggestions on the coils would be appreciated 
3
Omega General Help / Front coil spring sizes???
« on: 12 April 2022, 16:23:54 »
Hello all, I’m after a new set of decent front springs, my old springs measure 360mm, when looking at some online sites some say left and right are different in height? Is this true? I’m swaying just to go with 360mm on both sides, also can anyone suggest where I can get Sachs springs from or equivalent versions? Cheers all
4
Omega General Help / Re: What’s this wire/sensor I’ve broken?
« on: 17 December 2021, 15:32:48 »
Yes that’s the broken wire so deffo knock sensor?
5
Omega General Help / Re: What’s this wire/sensor I’ve broken?
« on: 17 December 2021, 15:04:44 »
What you said sounds like the knock sensor wire, phew car will still run until new one is fitted thanks guys
7
Omega General Help / Re: What’s this wire/sensor I’ve broken?
« on: 17 December 2021, 14:38:00 »
Thanks eBay item number doesn’t work I’ll try getting another
8
Omega General Help / What’s this wire/sensor I’ve broken?
« on: 17 December 2021, 14:30:13 »
Doh I’ve just managed to break this wire and need help to identify what it is pls
I cant seem to add a pic but looking in-front of the car on the timing cover you have the plastic wire carrier, on the left hand side above the aux pulley the connector is there and looks like is goes near the alternator X25XE engine.
If you look on eBay item number 384477700791 picture 1, you’ll see that I mean thanks all
I cant seem to add a pic but looking in-front of the car on the timing cover you have the plastic wire carrier, on the left hand side above the aux pulley the connector is there and looks like is goes near the alternator X25XE engine.
If you look on eBay item number 384477700791 picture 1, you’ll see that I mean thanks all
9
Omega General Help / Central locking module boot wire
« on: 14 March 2021, 17:08:14 »
Hi people, bought a keyless entry as my fob stopped working, I have figured out the opening and closing for the central locking, does anyone know what colour the boot wire is from the locking module on the driver side footwell?
10
Omega General Help / Re: Crank sensor wiring diagram
« on: 06 July 2019, 17:39:31 »
Now here’s the thing, when I buy one which one do I go for, the one that came out is oval head but Siemens brand, part number 90 492 061, this is the one I’ve put in off the other engine and also had GM stamped on the part
11
Omega General Help / Re: Crank sensor wiring diagram
« on: 06 July 2019, 17:11:09 »
It was the crank sensor after all this time I had a spare one in the garage whacked it on and she’s firing on all cylinders been running on idle for some time not missed a beat lesson learned I’m getting one from dealers that’s for your help all
12
Omega General Help / Re: Crank sensor wiring diagram
« on: 06 July 2019, 10:19:30 »
Let me check my numbers!
13
Omega General Help / Re: Crank sensor wiring diagram
« on: 06 July 2019, 07:59:47 »
Crank Sensor is ‘Lemark’ brand, EGR valve has been change with a working old one so has the throttle sensor.
14
Omega General Help / Re: Crank sensor wiring diagram
« on: 05 July 2019, 22:08:14 »
She still runs the same without the MAF sensor I need to no what signal/earthing/live that is coming from the Ecu, car stalls at lights and junction/idle I need to rule out the Ecu
15
Omega General Help / Crank sensor wiring diagram
« on: 05 July 2019, 21:07:20 »
Evening all
Got a slight issue with my car. Stalling at junctions and traffic lights. Checked fault code and was showing crankshaft sensor fault. Replaced sensor and fault code still present/won’t clear. Does anyone have a wiring diagram for the crankshaft sensor circuit so I can confirm if it’s a sensor fault or wiring/ecu fault?
Got a slight issue with my car. Stalling at junctions and traffic lights. Checked fault code and was showing crankshaft sensor fault. Replaced sensor and fault code still present/won’t clear. Does anyone have a wiring diagram for the crankshaft sensor circuit so I can confirm if it’s a sensor fault or wiring/ecu fault?