Managed to get replacement door lock mechanism. Looking for advice on fitting one of the connections. There a 4 with 3 being connected with rods which are straight forward. Need advice on the one for the handle appears to be a bit of plastic at the bottom does it just sit in the hole, dont see anything to secure it. there was nothing securing the one I removed. Cheers in advance.
Any advice unable to open my drivers door from the outside or inside. Appears to be deadlocked if that makes sense. Using the key in the lock does not work either. Any advice would be appreciated as I need it for work tomorrow.
Anyone got a windscreen trim from a 2.2 rubber. Looking at the 2.6 it appears different and looks more plastic and been told on here is fitted before screen is bonded. The trim on the 2.2 just pulls out.
Was having problems with my keys opened them up and noticed that battery terminals had came away from the circuit board on both keys and the previous owner had used silver paper as the contacts were no longer there. Can I just buy a replacement key and circuit board as long as I fit the chip from the original.
Decided to turn over the miggy as she has lay in the drive for about a month. Had to give her a jump as the battery was flat. She started no bother but the problem is that the hazards wont stop flashing. Ant ideas anyone.
Car just back from MOT one advisory was that it had an oil leak at the back of head. Tester says it was dripping onto gearbox but was unable to locate were the leak was coming from as it was saturated in oil. Had no idea as I was not losing any oil or no oil marks in the driveway. Is ther any pipes at the back that could be leaking or am a looking at a more serious problem. Its on the 2.2. cheers in advance