Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  


Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Replacing SRS (airbag) Module FAO Jimbob  (Read 2537 times)

0 Members and 1 Guest are viewing this topic.


  • Omega Queen
  • ********
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13825
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Replacing SRS (airbag) Module FAO Jimbob
« on: 14 November 2010, 14:33:58 »

Follow instructions in this thread (courtesy of Albatross)

REMEMBER TO DISCONNECT BATTERY & wait for 10-15 minutes
Then you can remove the centre console in it`s entirety. When removed you will have access to this once you have removed the heater ducting (just pull towards rear then slide forward to access the nuts)

Undo the 4 x 10mm nuts & remove armrest bracket and you will see the module

Undo the 3 x 10mm nuts remove module and unclip multi-connector

Fit new module (same ident, in this case EF)
Re-fit everything in reverse order, job done.

If it`s suitable Jimbob please move to maintenance. Cheers.
« Last Edit: 27 September 2011, 11:55:15 by Jimbob »
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted
Pages: [1]   Go Up

Page created in 0.155 seconds with 21 queries.