Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Tom Byrne]

Hi is anyone out there? Im Tom a very newby,I posted yesterday ,re above,but still no responce,
i.e tips on replacing matrix, am I doing something wrong with this message/

[RobG]

Read this Tom http://www.omegaowners.com/forum/index.php?topic=90621.0
Any other assistance post in "Omega general help"

[Tom Byrne]

anyone ellse got any tips on how to fit a new heater matrix>

[RobG]

anyone ellse got any tips on how to fit a new heater matrix>

That`s the easiest way..................unless you wanna strip the dash out

[Darth Loo-knee]

Hi is anyone out there? Im Tom a very newby,I posted yesterday ,re above,but still no responce,
i.e tips on replacing matrix, am I doing something wrong with this message/

Hi Tom 

Just checked your posts to see where you posted.
In the Newbie area is where to introduce yourself. However not the best place to post problems that you need help with.
Hope that helps as why not as many people as perhaps hoped had replied.
I have moved it for you so hope that helps

[dad1uk]

Hi Tom, the advice above is the best(easiest)......
The only thing I did was to remove the drivers seat to help with access because I am not the smallest of people. The one thing I forgot to do was disconnect the battery so I ended up with the airbag light on which was kindly reset at Newent last year.
The job is more fiddly than difficult and if you are carefuly how you cut the board it is almost impossible to see the join. I manage to peel the Black Vinyl back so that didn't get cut.

[Tom Byrne]

Hi everyone, the time is now 2.30 sat. afternoon, just finished work, might give it a good course of looking at, think about it, go for a pint, watch the Man U match, and attack it in the morning.
 Thanks very mutch for your help , cheers

[Darth Loo-knee]

Hi everyone, the time is now 2.30 sat. afternoon, just finished work, might give it a good course of looking at, think about it, go for a pint, watch the Man U match, and attack it in the morning.
 Thanks very mutch for your help , cheers

This part is the only bit that needs scraping 

[fakeq]

Read this Tom http://www.omegaowners.com/forum/index.php?topic=90621.0
Any other assistance post in "Omega general help"

Hello, need to do this job myself. Just wondering on the guide it seems the drivers side is right side, should I cut on the passenger side when drivers side is on the left?

[RobG]

Whatever side the matrix pipes go through the bulkhead