151
General Car Chat / I love...
« on: 20 December 2011, 21:52:53 »
...when she starts ruckling at around 2500rpm... 
- 29 April 2024, 03:47:20
- Welcome, Guest
News:
Please check the Forum Guidelines at the top of the Newbie section
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
152
General Discussion Area / Laszlo's first cake - pics
« on: 14 December 2011, 10:57:06 »
My wifey baked a cake for our godson's birthday...this : http://kepfeltoltes.hu/111214/kristof_sz_linapja_001_www.kepfeltoltes.hu_.jpg
while she was baking I got a strong feeling to make my own cake...this : http://kepfeltoltes.hu/111214/kristof_sz_linapja_019_www.kepfeltoltes.hu_.jpg
there was a moment I couldn't help taste it before serving
hope nobody will notice...http://kepfeltoltes.hu/111214/kristof_sz_linapja_020_www.kepfeltoltes.hu_.jpg
sorry for severe clicking anywhy system just gives URLs, but doesn't open them...
while she was baking I got a strong feeling to make my own cake...this : http://kepfeltoltes.hu/111214/kristof_sz_linapja_019_www.kepfeltoltes.hu_.jpg
there was a moment I couldn't help taste it before serving
hope nobody will notice...http://kepfeltoltes.hu/111214/kristof_sz_linapja_020_www.kepfeltoltes.hu_.jpgsorry for severe clicking anywhy system just gives URLs, but doesn't open them...
153
Omega General Help / Aircon pipe welding
« on: 10 December 2011, 17:56:51 »
Heya all,
a service connector of aircon was shot out by pressure so I decided to repair it. English is being hard for me ergo I made some pics. The job, self, is not a huge amount of effort general tools are needed as you will see on pics.
To make a bit more place to feel free to work I temporarily removed the battery and disconnected one hose of SAI valve.
Slackened the questioned pipe connection, down between two spanner you can see the empty place of gas filling connector (was shot out) as a simple hole.
I had to slacken from the other end too, which belongs to aircon cooler.
On the left is a second hand tank, on the right is the old one. As you see the alu ends don't fit to each other . I couldn't use the second hand one instead the original, so I cut down both end to get me easy to re-pair them.
I was so lucky that outer diameter of one was the same as the inner diameter of other I just had to cut two new screw - inside and outside.
Pre-welding status, seems good but connected by screw only I'm not sure it's enough strong...
After welding and refitting. Dismantling took for 30min max, to put back as well. Being not really a mechanic but electric man I wasn't sure in myself but everything was OK in the end. Hope it will useful for any of you. Laszlo
a service connector of aircon was shot out by pressure so I decided to repair it. English is being hard for me ergo I made some pics. The job, self, is not a huge amount of effort general tools are needed as you will see on pics.
To make a bit more place to feel free to work I temporarily removed the battery and disconnected one hose of SAI valve.
Slackened the questioned pipe connection, down between two spanner you can see the empty place of gas filling connector (was shot out) as a simple hole.
I had to slacken from the other end too, which belongs to aircon cooler.
On the left is a second hand tank, on the right is the old one. As you see the alu ends don't fit to each other . I couldn't use the second hand one instead the original, so I cut down both end to get me easy to re-pair them.
I was so lucky that outer diameter of one was the same as the inner diameter of other I just had to cut two new screw - inside and outside.
Pre-welding status, seems good but connected by screw only I'm not sure it's enough strong...
After welding and refitting. Dismantling took for 30min max, to put back as well. Being not really a mechanic but electric man I wasn't sure in myself but everything was OK in the end. Hope it will useful for any of you. Laszlo
154
Omega General Help / Aircon sys internal pressure
« on: 05 December 2011, 14:00:13 »
May you know how many bar it is? An alu pipe is being welded so I'll want to get it tested if the job is done. Don't know what pressure should be ensured, though... 
Any advice welcomed! Laszlo
Any advice welcomed! Laszlo
155
General Discussion Area / Six word stories
« on: 02 December 2011, 12:03:52 »
Heya all,
somewhere I've read about Ernest Hemingway who used to bet some dollars to write a complete story - only in six words. He won. I wrote one too, about my miggy :" Like wife: job done - sometimes striking." It's not too easy to extract a story into six word so I won't bet on grammatical correctness of my story... But I suppose it's very good fun. Do you have any? 
somewhere I've read about Ernest Hemingway who used to bet some dollars to write a complete story - only in six words. He won. I wrote one too, about my miggy :" Like wife: job done - sometimes striking." It's not too easy to extract a story into six word so I won't bet on grammatical correctness of my story...
But I suppose it's very good fun. Do you have any?
156
Omega General Help / Starter ability (max starter current) of battery
« on: 01 December 2011, 08:34:42 »
Hi all,
I would like to swap my battery but don't know exactly how many amps starter current required is in case of my 2.5 pre. Some of you have already been so nice to answer me once but I'm afraid of didn't manage to get myself understood properly. Well I'll buy a brand new battery , 70Ah capacity, three version are offered by Opel Database though, namely : 70Ah and 550A max starter current, 70Ah and 680A max starter current, 70Ah and 880A max starter current. There is significant difference between the prices of first and last one, dimensions are the same. So, what sort of battery do you use looking at the starter current ability?
Thx Laszlo
I would like to swap my battery but don't know exactly how many amps starter current required is in case of my 2.5 pre. Some of you have already been so nice to answer me once but I'm afraid of didn't manage to get myself understood properly. Well I'll buy a brand new battery , 70Ah capacity, three version are offered by Opel Database though, namely : 70Ah and 550A max starter current, 70Ah and 680A max starter current, 70Ah and 880A max starter current. There is significant difference between the prices of first and last one, dimensions are the same. So, what sort of battery do you use looking at the starter current ability?
Thx Laszlo
157
General Discussion Area / The man unable to do two things in the same time
« on: 26 November 2011, 18:45:41 »158
Omega General Help / 65Ah battery starter current
« on: 24 November 2011, 22:18:18 »
Hi all,
thats ok that 65Ah battery recommended but how many amps of starter current ability does it need ? I'm using one of 74Ah with 680A starter current but doesn't work properly so it's time to swap. As my intention is to save as much money as possible I wouldn't like to pay for one which is oversized and overpriced...Please let me know what starter ability of battery is the best choise for her... 2.5 V6 preface aircon
Cheers Laszlo
thats ok that 65Ah battery recommended but how many amps of starter current ability does it need ? I'm using one of 74Ah with 680A starter current but doesn't work properly so it's time to swap. As my intention is to save as much money as possible I wouldn't like to pay for one which is oversized and overpriced...Please let me know what starter ability of battery is the best choise for her... 2.5 V6 preface aircon
Cheers Laszlo
159
General Discussion Area / Do you consider yourself a good liar ?
« on: 19 November 2011, 00:03:29 »
How are you related of using a good liar? Are they sometimes useful ? For example nowadays Christmas is coming...or whatever else...? Hm ?
160
Omega General Help / LPG - conversion from mixer to sequencial - is it worth?
« on: 17 November 2011, 22:06:07 »
I have an old style Miggy with an old style gas equipment maybe a first generation of Lovato from Italy. Unfortunately in gas mode it is not enough strong when idling and I often feel as if she didn't get fuel and wanted to shut down. For example if I'm steering to the max to any direction or aircon is starting...Actual idle of mig is 600-650 rpm I guess it must be good. Or should I get it increase in LPG mode? Or should I get her a conversion from mixer to sequencial ? Could you propose me anything? Many thanks . Laszlo
161
General Discussion Area / Smallpox parties - is it right?
« on: 15 November 2011, 07:28:58 »
American parents continously organised so named smallpox parties to their children. As they said their goal is to help easy and fast pox infection to each other. "The fastest the best". Following this way of infecting they can spare a lot of time and money, so many different event can be organized previously for the time the child ill... - I can't decide whether if they known about preventer vakcine...
162
Omega General Help / Cat cleaner
« on: 05 November 2011, 07:44:35 »
Gents,
has anyone ever used cat cleaner treatment? The name of what I know is CataClean is it really so effective as advertised? Any think about any cat cleaner welcomed!
Cheers
has anyone ever used cat cleaner treatment? The name of what I know is CataClean is it really so effective as advertised? Any think about any cat cleaner welcomed!
Cheers
163
Omega General Help / RPM falling between shifts. LPG mode only.
« on: 03 November 2011, 07:47:58 »
Heya fellas,
it's occured only when I run fast, I want to shift up or down and the idle won't stop at around 1500 between shifts but falling away. If I'm not enough smart or fast my Mig loose the idle totally and shuts down. Solely between 4 and 5 grade and in LPG mode. Any advice or suggestion welcomed!
it's occured only when I run fast, I want to shift up or down and the idle won't stop at around 1500 between shifts but falling away. If I'm not enough smart or fast my Mig loose the idle totally and shuts down. Solely between 4 and 5 grade and in LPG mode. Any advice or suggestion welcomed!
164
Omega General Help / Oil pressure : min 1,2 bar, max...?
« on: 27 October 2011, 03:48:15 »
Hi all,
how many bar is the max what acceptable yet?
how many bar is the max what acceptable yet?
165
Omega General Help / Reference numbers
« on: 25 October 2011, 22:35:40 »
Hey,
where can I find any list about correlation between Vaux and Opel/Bosch part numbers? Doawnloadable in advantage any link is welcomed! Thanks
where can I find any list about correlation between Vaux and Opel/Bosch part numbers? Doawnloadable in advantage any link is welcomed! Thanks