Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Shackeng]

Wanted, as above, the plastic bits that fit underneath and round next to the grille. I think they are the same on both mfl and pfl. (Waits for RobG to confirm. )

[RobG]

Wanted, as above, the plastic bits that fit underneath and round next to the grille. I think they are the same on both mfl and pfl. (Waits for RobG to confirm. )

Confirmed

[Shackeng]

 

[I_want_an_Omega]

Do you need them with or without the holes for headlight washers?

[Shackeng]

Without them Rob.

[Agemo]

Suppose you are sorted now, but I have a nearside one in black, no holes. I may have another in the garage, will check tomorrow.

[Shackeng]

No still looking, any colour will do thanks.

[I_want_an_Omega]

I have a pair in silver, but with holes. If you were going to spray them another colour it would be easy enough to fill the holes in and then spray. HTH - Rob

[Shackeng]

I have a pair in silver, but with holes. If you were going to spray them another colour it would be easy enough to fill the holes in and then spray. HTH - Rob

Thanks Rob, I have a couple of Elite ones with holes I can use if necessary, ( I could fill these) but would to prefer to replace my damaged plain ones, I only really need the n/s one, although a clip is broken on the o/s also. Or I could fit elite h/l jets (like rocking horse manure apparently) and possibly the whole headlamp washer kit. I might go to stealers as it can't be that expensive.

[I_want_an_Omega]

I have a pair in silver, but with holes. If you were going to spray them another colour it would be easy enough to fill the holes in and then spray. HTH - Rob

Thanks Rob, I have a couple of Elite ones with holes I can use if necessary, ( I could fill these) but would to prefer to replace my damaged plain ones, I only really need the n/s one, although a clip is broken on the o/s also. Or I could fit elite h/l jets (like rocking horse manure apparently) and possibly the whole headlamp washer kit. I might go to stealers as it can't be that expensive.

I'm sure the trims cant be expensive - but the headlight washer nozzles are almost £50 each new 

[Shackeng]

Just got a PM about some trims, so hopeful.

[tigers_gonads]

Just seen this thread 

I know I have one pair (my spare) but might have a 2nd pair of a scrapper 
Give us a day or 2 too have a dig around 

[The Red Baron]

got a pair or green ones from a gls here, wish you had said when you was up.

[Shackeng]

got a pair or green ones from a gls here, wish you had said when you was up.

Thanks Jon, I said I could fill the holes in the Elite ones you gave me, but obviously it is easier to fit the blank ones, which I didn't realise that you had. D

[The Red Baron]

got a pair or green ones from a gls here, wish you had said when you was up.

Thanks Jon, I said I could fill the holes in the Elite ones you gave me, but obviously it is easier to fit the blank ones, which I didn't realise that you had. D

if you cant get hold of any, give me a shout & i will dig them out for you.