Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: HID'S  (Read 743 times)

0 Members and 1 Guest are viewing this topic.

jack68

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Berkhamsted Hertfordshire
  • Posts: 79
    • View Profile
HID'S
« on: 28 February 2011, 08:27:55 »
Hopefully i now have all the bits i need.  I'm looking at the five pin pklug from the old projectors and it has 4 wires in it and i have the one i've taken from the HID donor car and it has three wires.  I'm assuming that the yellow wire into the Ballast box is the live for it and the brown wire is the earth.  The question i have is can i take a feed off the brown wire in the five pin plug and place it in the ballast box?
Please don't ask me about the self levelling etc as i'm not fitting it i'm only adding the headlights.

Jack
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: HID'S
« Reply #1 on: 28 February 2011, 09:36:30 »
Leave projector plug in place (in case you need to swap back). Replace HID level motor with the projector motor....splice the yellow & brown wires from the HID plug into the yellow & brown wires on the projector plug. Fit 30A fuse in the fuseway at front of triangular relay box by battery (for washers).
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

jack68

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Berkhamsted Hertfordshire
  • Posts: 79
    • View Profile
Re: HID'S
« Reply #2 on: 28 February 2011, 09:57:02 »
Cheers Rob looks like another job for the weekend.

Jack
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.027 seconds with 21 queries.