Topic: Will This Ecu Work ? (Read 548 times)

V6Astra F · « **on:** 15 June 2009, 18:38:41 »

Hi

Ok i got my SAI sorted with the motronic 2.8.1

. Now i got this extra ecu but i dont know if it will work with the valves on the intake . Numbers on it are 90 457 098 & 0 261 203 272/273 FS . I had it in the car when i used the C25XE intake , using a Vectra B X25XE intale now . Just want to test it because i cant get those valves to work :-? , but i need to know if this ecu supports them .

Thank You

V6Astra F · « **Reply #1 on:** 19 June 2009, 08:00:09 »

Ok i found out that its a Motronic 2.8 from a X30XE , thats all i came up with

TheBoy · « **Reply #2 on:** 19 June 2009, 09:00:22 »

Quote

Ok i found out that its a Motronic 2.8 from a X30XE , thats all i came up with

AFAIK, that was only fitted to Omega and Sintra. Seeing as Sintra is pretty rare, its most likely Omega, and thus would have the Omega Multiram config.

Unsure if using a map chip from a Vectra would help, as presumably the valves are part of the map :-/ - but that is purely a guess.

V6Astra F · « **Reply #3 on:** 19 June 2009, 09:23:45 »

Thanks , im going to give it a try this weekend then

News:

Author Topic: Will This Ecu Work ? (Read 548 times)

V6Astra F

Will This Ecu Work ?

V6Astra F

Re: Will This Ecu Work ?

TheBoy

Re: Will This Ecu Work ?

V6Astra F

Re: Will This Ecu Work ?