3.2 TB replacement
Gates kit Part number: K035453XS
Lined up the yellow double mark on the bottom pulley, slotted in the locking tab, started working my way up counter clockwise from the pulley, got to the first cam (4th cam), started working it round and then over to the 3rd cam and it doesn't look very happy with the teeth on the belt on 3rd cam.
I was using cam locking widgets from an older locking kit I had that felt a bit loose, so swapped those with the ones from the kent moore locking kit I had, didn't seem to make much difference.
I bought the kit opened, but not used, off a fellow so I'm wondering now is it the wrong belt, or for the pre-facelift. It's got the double yellow and double white lines, with only white marks for the cam line up marks.
It seems to almost line up here cam 4, but I feel like the line should be above the tooth not the gap, the cam and notch behind it seems to line up ok, but the belt won't go any further, and if it did the white line wouldn't line up with marks then:
https://photos.app.goo.gl/5EDjCTqB5oBuuhY69But the line on the belt won't stretch over to the notch on the cam 3.
Any ideas?
Thanks
G