46
Omega General Help / Re: V6 Cambelt
« on: 05 August 2010, 16:23:08 »
1 bid is that you ? 
- 29 April 2024, 07:24:06
- Welcome, Guest
News:
Search the maintenance guides for answers to 99.999% of Omega questions
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
47
Omega General Help / Re: V6 Cambelt
« on: 05 August 2010, 13:50:31 »
Could start here
Good price at the moment !!!!!
http://cgi.ebay.co.uk/V6-Petrol-Locking-Setting-Kit-GM-/300452011823?cmd=ViewItem&pt=LH_DefaultDomain_3&hash=item45f455df2f
Good price at the moment !!!!!
http://cgi.ebay.co.uk/V6-Petrol-Locking-Setting-Kit-GM-/300452011823?cmd=ViewItem&pt=LH_DefaultDomain_3&hash=item45f455df2f
48
Omega General Help / Re: V6 Cambelt
« on: 05 August 2010, 13:45:16 »
Not a bad job.
Even easier if you buy the DVD from here
See shop only three squid
Even easier if you buy the DVD from here
See shop only three squid
49
Omega General Help / Re: wheel alignment figures
« on: 01 July 2010, 17:44:24 »Quote
Well worth the drive from Swindon to Chesham. A set of tyres will cost a lot more than the fuel and setup fee.
Wheels In Motion every time
Agreed. Also spray adjusters with plenty of Plus Gas much better than WD40 - Front & Back.
50
Omega General Help / Re: 2.2 with P0170 code
« on: 13 April 2009, 20:45:15 »Quote
Quotehi what diagnistic tool are you using? i have seen some on ebay at around £40 but not too sure as to their use.
It's the opelscanner and it's own software
Genuine Opelscanner not a copy from ebay with very early version of the software - many things have been added and corrected.
51
Omega General Help / Re: DISPLAY ?
« on: 13 March 2010, 19:02:21 »Quote
QuoteAnd he means wellAnd he gives people incorrect advice
Not the first time & I don't expect the last time
"utter 'dangle berries'" is over the top especially from admin to another forum member.
I use the forum for help and give help where I can - not much I know
OTT in my opinion
Post count don't give a sh!t.
52
Omega General Help / Re: Storing the miggy
« on: 10 March 2010, 17:06:30 »
Make sure you have the rado code.
Seal the garage and use a dehumidifier works out cheaper than heating the garage - not sure its set not to go below 4C
Seal the garage and use a dehumidifier works out cheaper than heating the garage - not sure its set not to go below 4C
53
Omega General Help / Re: tyre life expectancy
« on: 17 February 2010, 15:31:57 »
No problem with two Falken tyres I have.
54
Omega General Help / Re: where is the sim card for the factory phone on my
« on: 16 January 2010, 17:37:11 »
Welcome
What radio etc does the car have
or is it a non-factory fitted phone?
What radio etc does the car have
or is it a non-factory fitted phone?
55
Omega General Help / Re: 4 Wheel Alignment
« on: 30 November 2009, 15:57:31 »Quote
Can you please explain what are the WIM settings?
thanks
Wheels-in-motion ---- Tony helped a lot of Omega owner solving tyre wear & more. See here : http://www.wheels-inmotion.co.uk/
56
Omega General Help / Re: New MAF doesn't work
« on: 10 January 2007, 11:24:18 »
Looks like the correct one.
Found it without the RF in the part number.
SIEMENS
5WK9606
OPEL ECOTEC
90530463, 836583
GMC
90530 463
SIEMENS
5WK9641
OPEL ECOTEC
90530463, 836583
GMC
90530 463
Meriva
1.8
Z18XE
2003 ?
Omega B
2.2 16V
Y22XE - Z22XE
1994? - 2003
Signum
1.8
Z18XE
2003 ?
Vectra B
1.8 16V
X18XE1 - Z18XE - Z18XEL
1996-2001
Vectra C GTS
1.8 16V
Z18XE - Z18XEL
2002 ?
Vectra C
1.8 16V
Z18XE - Z18XEL
2002 ?
Zafira
1.8 16V
Z18XEL - Z18XE - X20XER - X20XEV - X18XE1
Found it without the RF in the part number.
SIEMENS
5WK9606
OPEL ECOTEC
90530463, 836583
GMC
90530 463
SIEMENS
5WK9641
OPEL ECOTEC
90530463, 836583
GMC
90530 463
Meriva
1.8
Z18XE
2003 ?
Omega B
2.2 16V
Y22XE - Z22XE
1994? - 2003
Signum
1.8
Z18XE
2003 ?
Vectra B
1.8 16V
X18XE1 - Z18XE - Z18XEL
1996-2001
Vectra C GTS
1.8 16V
Z18XE - Z18XEL
2002 ?
Vectra C
1.8 16V
Z18XE - Z18XEL
2002 ?
Zafira
1.8 16V
Z18XEL - Z18XE - X20XER - X20XEV - X18XE1
58
Omega General Help / Re: cheap air con top up
« on: 30 May 2009, 18:14:01 »
Kwik - Fit [sorry for swearing] do for a reasonable price
As for standard ?
Think they charge about £45.00 but may have gone up?
As for standard ?
Think they charge about £45.00 but may have gone up?
59
Omega General Help / Re: cam belt help
« on: 13 April 2009, 17:52:58 »
I've got a locking kit & the dvd and I'm in Berkhamsted,
done my own. Need a 30mm cranked ring spanner
Don't have the time to do it at the moment.
done my own. Need a 30mm cranked ring spanner
Don't have the time to do it at the moment.
60
Omega General Help / Re: Fault code
« on: 05 March 2009, 23:23:17 »Quote
There is a member in the same town as you with a decent code reader, get all the codes reset, and see what comes back.
Must be me --- Glad to see Opelscanner as a decent code reader
Happy to read codes, if it help solves your problem