Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Raymienets on 13 October 2012, 18:23:52

Title: Windscreen trim
Post by: Raymienets on 13 October 2012, 18:23:52
Looking for rubber windscreen trim from a 2.2 if anyone has one lying about or knows someone who is breaking one. PM me please
Title: Re: Windscreen trim
Post by: 05omegav6 on 13 October 2012, 19:17:44
If no joy they are readily available from VX, not too pricey :y got one and the frame when I had a new screen fitted in July :y

Just looked and the rubber and all 4 parts of the frame that it clips into were £49 + vat, nothing was over £15 individually :y
Title: Re: Windscreen trim
Post by: 05omegav6 on 13 October 2012, 19:21:47
Just to add the design was changed at some point, so if you need to change the frame you will need to buy all four sides and also the frames fitted by replacement windscreen peeps can be different to both the Vauxhall designs :y
Title: Re: Windscreen trim
Post by: Raymienets on 13 October 2012, 19:42:36
This gets more confusing. The one I need replacing is in one piece and only goes down sides and along top, That fox has a lot answer for when it decided to have mine for dinner.
Title: Re: Windscreen trim
Post by: 05omegav6 on 13 October 2012, 21:02:46
Right, I've dropped a bit of a block :-[

Original design: rubber trim x2, 1 top and both sides, 1 across bottom edge. plastic frame x2, same as rubber.

Later design:  rubber trim x2, 1 top and sides, 1 across bottom edge. plastic frame x4, 2 sides, 1 top, 1 bottom.

Only the rubbers are interchangeable :y

Pattern frames supplied by winscreen frames vary, but usually depend on the rubber being reusable.

Visible differences between two cars could be down to the various frames used and also the actual position of the glass depending on whether the screen is original/replaced properly in the correct position/just thrown in.

Either way the trims are available :y
Title: Re: Windscreen trim
Post by: Raymienets on 13 October 2012, 22:02:56
Right, I've dropped a bit of a block :-[

Original design: rubber trim x2, 1 top and both sides, 1 across bottom edge. plastic frame x2, same as rubber.

Later design:  rubber trim x2, 1 top and sides, 1 across bottom edge. plastic frame x4, 2 sides, 1 top, 1 bottom.

Only the rubbers are interchangeable :y

Pattern frames supplied by winscreen frames vary, but usually depend on the rubber being reusable.

Visible differences between two cars could be down to the various frames used and also the actual position of the glass depending on whether the screen is original/replaced properly in the correct position/just thrown in.

Either way the trims are available :y



Cheers
Title: Re: Windscreen trim
Post by: Raymienets on 13 October 2012, 22:03:30
Cheers



Right, I've dropped a bit of a block :-[

Original design: rubber trim x2, 1 top and both sides, 1 across bottom edge. plastic frame x2, same as rubber.

Later design:  rubber trim x2, 1 top and sides, 1 across bottom edge. plastic frame x4, 2 sides, 1 top, 1 bottom.

Only the rubbers are interchangeable :y

Pattern frames supplied by winscreen frames vary, but usually depend on the rubber being reusable.

Visible differences between two cars could be down to the various frames used and also the actual position of the glass depending on whether the screen is original/replaced properly in the correct position/just thrown in.

Either way the trims are available :y



Cheers