Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[cem_devecioglu]

Done nout with mine, it's pessing down. 

Been lovely here all day, but been sat in front of a server screen all day, trying to resolve some problems before they affect us  , another weekend gone 

thanks for your endless efforts.. 

[Dishevelled Den]

 

Pretty much the rest of the time was toshing about with the server

 

[bootie]

Nothing, I'm in Malaysia and the cars in Scotland

[Omegatoy]

Nothing, I'm in Malaysia and the cars in Scotland

lol well i welded some gates back together, concreted a track in for the wheels to run on, finally got the hateful smartcar up and running, and straightened the front cross member on the agila, so it now drives straight and true, got home and swmbo said your late been to the bar again?, i havent stopped all day!!!

[feeutfo]

Done nout with mine, it's pessing down. 

Been lovely here all day, but been sat in front of a server screen all day, trying to resolve some problems before they affect us  , another weekend gone 

thanks for your endless efforts.. 

don't give him sympathy cem! He'll get entirely the wrong idea...  .  Mind you, your probably safe in Turkey.      

[Darth Loo-knee]

Not my car but, repalced stem seals, relapped valves, new exhaust manifold gaskets, cleaned everything ready to start putting things back tomorrow after I have fitted another knock sensor

[albitz]

A 2.6 I presume ?

[Darth Loo-knee]

A 2.6 I presume ?

Yeap

[Darth Loo-knee]

First job re placed knock sensor, fitted head gaskets then the heads. Toatally re built all back up with new cambelt etc.....
Fitted all little bits that were missing under tray, wishbone sensor, caps here and there.
Started here up, got the air out of the water system then went out for a spin. . Goes very well sure Mr. Owner will be over the moon as it was as flat as a witches tit and no go. . .      

Going to treat myself to a Stella 

[albitz]

Stripped, cleaned and reassembled an SU carb on an old mini. Cleaned and gapped the points/plugs and adjusted the tickover - banged my head on the bonnet catch about 15 times.
Rubbed down some aerosol paint on an MX5 which had been done by the owner - he had made a complete dogs breakfast of it.
Took pics of an ECU for DaveDND, posted some parts off. Removed the rear spoiler from the bootlid on the breaker.

[feeutfo]

Put my eml on again with multiple misfire codes trying to calibrate my LPG... It's not having it. 

Booked in to see Kev on Thursday. 

[jonnycool]

Stripped, cleaned and reassembled an SU carb on an old mini. Cleaned and gapped the points/plugs and adjusted the tickover - banged my head on the bonnet catch about 15 times.
Rubbed down some aerosol paint on an MX5 which had been done by the owner - he had made a complete dogs breakfast of it.
Took pics of an ECU for DaveDND, posted some parts off. Removed the rear spoiler from the bootlid on the breaker.

Got a scar or two from that myself 

[Lazydocker]

Put my eml on again with multiple misfire codes trying to calibrate my LPG... It's not having it. 

Booked in to see Kev on Thursday. 

Was going to ask about that. Still not happy then? :-/ :-/

[feeutfo]

Put my eml on again with multiple misfire codes trying to calibrate my LPG... It's not having it. 

Booked in to see Kev on Thursday. 

Was going to ask about that. Still not happy then? :-/ :-/

Afraid not, tried again yesterday. Got all 6 cylinders this time, but it still runs progressively grumpy through the calibration procedure until it practically stalls, eml on, half the cylinders shut down by the petrol ucu so have to restart. There's no point me keep playing with it. Needs an expert eye.

[Lazydocker]

Put my eml on again with multiple misfire codes trying to calibrate my LPG... It's not having it. 

Booked in to see Kev on Thursday. 

Was going to ask about that. Still not happy then? :-/ :-/

Afraid not, tried again yesterday. Got all 6 cylinders this time, but it still runs progressively grumpy through the calibration procedure until it practically stalls, eml on, half the cylinders shut down by the petrol ucu so have to restart. There's no point me keep playing with it. Needs an expert eye.

Did you speak with Teilo? Seems strange that yours won't calibrate but the others were fairly close out of the box :-/ :-/

Unless it is the vaporiser, although I wouldn't have thought so, they're pretty sturdy :-?

What have you done differently?