Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

16

Omega Electrical and Audio Help / Re: #Fuse 29 - Fan

« on: 30 April 2023, 11:15:04 »

Aircon fans are in front of the radiator. Check both spin freely and report back 

Thanks Doctor Gollum,

I know where the fans are and I know they are working.
The fuse blows after a few seconds when it is hot after several minutes when it is cold.
I know that the fuse don't blows when I don't start the air conditionned. And I know that the fuse blow when it's, so I think it is inside fan and not electrical cable but I'm Not sure, because I don't know how it is inside fan motor.

17

Omega Electrical and Audio Help / #Fuse 29 - Fan

« on: 29 April 2023, 13:07:09 »

(Omega Y32 2001) (France)

Hello,

I have a problem with fuse 29 (radiator fan).
The fuse blows a few seconds after turning on the air conditioning when it is hot, or a few minutes after turning on the air conditioning when it is less hot or cold outside.
I concluded that the air conditioning fans had a problem with the air temperature. That is to say that when they are hot, the fuse blow. A I Wrong ?

Is the a relay inside of the fan ? A relay who doesn't like the heat?

Thanks for help

Lookitt

18

Omega Electrical and Audio Help / Re: NCDC 2015 - Black Screen

« on: 15 August 2021, 15:26:01 »

Even the speakers are not compatible?

Maybe this is the best solution, indeed.
All of you have your NCDC working ?

19

Omega Electrical and Audio Help / Re: NCDC 2015 - Black Screen

« on: 15 August 2021, 14:41:13 »

Hello,

I've finally succedded to extract the radio from his base.
I'opened the radio but seen nothing after examine all components and plugs. It's too complicated for me to investigate further.

http://www.calibra-classic.org/espace-membres/lookitt/photos/omega_B/IMG_9221.jpg

I will look for a way to adapt a recent radio to the BOSE system

20

Omega Electrical and Audio Help / Re: NCDC 2015 - Black Screen

« on: 25 April 2021, 21:18:55 »

Thanks again TheBoy to help me.
I'll test again tomorrow. I'had looked all fuses of NCDC before yes.

When I'will extract it, I'will open it, because something make a noise inside when I shake it
Thanks again, it's cool 

21

Omega Electrical and Audio Help / Re: NCDC 2015 - Black Screen

« on: 25 April 2021, 12:13:24 »

I forgot to specify it, I had already reset with the Clear button.
Moreover, this implies that the clear button works because I hear the reset being done. But Nothing changes.

I've connected the station this morning (>15 Min), nothing, changes. Now, I Can't take it out anymore
I've been trying to get it out with the extraction keys for 1 hour, there is nothing to do.

I've to find a TechII, but why Opel can't read with the TechII ? 


I am desperate. Never mind.
Thank you anyway for your help. 

22

Omega Electrical and Audio Help / Re: NCDC 2015 - Black Screen

« on: 25 April 2021, 01:35:59 »

Really, thanks for your time about my problem.

When Opel guys connected TechII, they can't read noting at all. I'don't understand why ?
Maybe the connexion is fautly ?...

So, yes the steering wheel buttons work, but only volume, not the changing channel of radio. The volume button on the radio works, also On / Off. All others buttons don't work.
The screen still totaly black, there isn't any light. I think the problem between the sreen and the lack of control and operation is the same.

I've extracted the station, do you see something wrong on the picture ? Which connector do you think ?
I think, it's worth fixing it, I want to keep it. Someting make a nose when I take it and spin it around, I'll open it and take a picture.

http://www.calibra-classic.org/espace-membres/lookitt/forum/photos/NCDC2013-Facade.jpg

PS : It's a NCDC2013 and not 2015, I can't modify the title of the post.

23

Omega Electrical and Audio Help / Re: NCDC 2015 - Black Screen

« on: 21 April 2021, 12:25:02 »

Hello TheBoy

Thank you for your informations. The problem has evolved since the last time. In addition to the black screen, I only have ON / OFF, the sound controls and one radio channel that I can't change. Everything else don't works. I took it to Opel but it's impossible to make a diagnostic with the TechII. All the fuses are good in the car, but I haven't looked if the station has one. Is that the case ? I ordered extraction keys to take it apart and watch. I am also thinking of completely changing the model. Are there modern stations that can be adapted with the Bose System?

Thanks

Lookitt

24

Omega Electrical and Audio Help / Re: NCDC 2015 - Black Screen

« on: 26 February 2021, 20:17:35 »

It's a color screen.

at first, the screen went off but the sound worked. Then it came back after a few minutes. Little by little, it started working again less frequently. Then it never came back. Today the radio works only on one channel. Unable to change channel the commands no longer respond. The sound volume is working.
I pulled the radio out of its slot and put it back. the problem is still here.

I will try to access the screen connections but since I can no longer change the channels I have the impression that there is another problem. Or the screen shows information that I cannot see.

Thanks VXL V6

25

Omega Electrical and Audio Help / NCDC 2015 - Black Screen

« on: 26 February 2021, 19:26:36 »

Hello,

sorry, I'm French, my english is perhaps not good.

I've problem with my NCDC2015 from Omega 3.2 Executive (2001). The screen became totaly black, theres' no information of Tuner/GPS/Board Info etc... but the sound works.

I'didn't found same problem in forum. Someone had same problem ?


Where do you think the problem could come from and what should be done? 

26

Omega Electrical and Audio Help / Re: NCDC 2013 - Radio Safe

« on: 02 August 2015, 23:13:07 »

Code ?

There's no code for this radio, no car pass and security code.

I've done a video to see better the problem.
https://www.youtube.com/watch?v=R1axCswcuwk

You can hear the "bip" all the 2 seconds with the message "Radio Safe" all the 5 seconds.

27

Omega Electrical and Audio Help / Re: NCDC 2013 - Radio Safe

« on: 31 July 2015, 22:39:19 »

Yes, it was working perfectly. In the first time, this message and "bip" sound come only when I use the station radio mode. When I use CD or CDC, no "bip" sound, no message. And after a few time (perharps 3 weeks) it come in all modes.

28

Omega Electrical and Audio Help / Re: NCDC 2013 - Radio Safe

« on: 29 July 2015, 23:29:37 »

I've changed nothing, it comes alone

29

Omega Electrical and Audio Help / Re: NCDC 2013 - Radio Safe

« on: 21 July 2015, 19:16:48 »

So, if someone sells a NCDC2013 for X30XE, I'll buy it 

30

Omega Electrical and Audio Help / NCDC 2013 - Radio Safe

« on: 21 July 2015, 19:15:18 »

Hello,

I've the problem of "Radio Safe" on my NCDC2013 (Omega X30XE) and I've seen in the forum that the only solution to resolve this is the TechII. I've been to Opel garage and they couldn't made the reset because of the problem about diagnostic radio. It doesn't try, they don't know why.

So it's not cool, because, no one can help me, it's a real problem  . I can explose my Omega or put on fire, unless if someone get a solution...

Lookitt from France.