Topic: My black body b elite. Courtny sports tuning (Read 7859 times)

Thomas-Elite · « **on:** 13 March 2011, 09:23:37 »

Here is my baby.

• Fuel 18" Alloy wheels
• Black xenon headlamps
• Irmscher front grill
• Richbrook black beesting ariel
Engine:
• Courtney Sport CS10 Gas-Flowed cylinder heads
• Courtney Sport highlift sports camshafts
• Courtney Sport remap
• Courtney Sport lightweight flywheel
• Courtney Sport uprated clutch
• Courtney Sport 4 bar fuel pressure regulator
• Enlarged throttle bodies
• Gas-Flowed inlet manifold
• Part Samco Sport silicone hoses
• Fredrich Motor Sport 3-2-1 exhaust manifolds
• Bastuck stainless steel exhaust system
• Hoffman sports cats

• Lowered 30mm front and back with Weitec shocks and springs.

• Drilled and groved disks all around with red stuff pads.

[/img]

[/img]
[img

[/img]

[/img]

Sorry there not to creative. Will be looking to get some more exciting ones when the summer is here. 8-)

the alarming man · « **Reply #1 on:** 13 March 2011, 09:30:27 »

i likey a lot ....very nice

Omega_Dan · « **Reply #2 on:** 13 March 2011, 09:30:30 »

Gorgeous! looks like a new car. subtle mods look great

jonnycool · « **Reply #3 on:** 13 March 2011, 10:02:37 »

Verrrry nice indeed

Onkel Per · « **Reply #4 on:** 13 March 2011, 15:30:12 »

A dark car and dark headlights is always a good start.
Great wheels as well.

geoffr70 · « **Reply #5 on:** 13 March 2011, 16:20:52 »

Would i be right i thinking it's a 2.5 with the shorter plenum? Has it been dyno'd at 300 bhp?

Dave C · « **Reply #6 on:** 13 March 2011, 16:26:23 »

Love it, where did you get the lights???

Thomas-Elite · « **Reply #7 on:** 13 March 2011, 17:18:50 »

Quote

Would i be right i thinking it's a 2.5 with the shorter plenum? Has it been dyno'd at 300 bhp?

Its a 3.0lt, the plenum is an enlarged courtny sports peace. 280-300 would be my guess. Am looking to get it remapped and dynoed again soon as it has a bit of a flat spot around 4k and would like to know what its runing true. Its a courtny spots map at the moment. They done al the work back in 2007

Thomas-Elite · « **Reply #8 on:** 13 March 2011, 17:20:25 »

Quote

Love it, where did you get the lights???

Lights were off the net. They are halo eyes with the halos removed

russ0205 · « **Reply #9 on:** 13 March 2011, 17:32:48 »

Looks great not a big lover of the pre f/l but i have to say i may eat my words,

Bojan · « **Reply #10 on:** 13 March 2011, 18:08:54 »

oh good lord!
This car is astonishing!

Not much modification on the exterior, just a BIG ASS ENGINE!

Just out of curiosity, how much does that kind of engine tuning cost?

Thomas-Elite · « **Reply #11 on:** 13 March 2011, 18:40:25 »

Quote

oh good lord!
This car is astonishing!

Not much modification on the exterior, just a BIG ASS ENGINE!

Just out of curiosity, how much does that kind of engine tuning cost?

I have receipts for the engine work alown for about 5k you could prob get it all done alot cheaper but its just the fact that al the work was done by courtney's.

Its good fun though. Not so much the speed but the down right power. The low end torque. 50 to 100 in 5th gear is blinding.

Bojan · « **Reply #12 on:** 13 March 2011, 19:52:30 »

what was the mileage of the engine when this modifications were done?
how does the engine handle extra stress so far?

Thomas-Elite · « **Reply #13 on:** 14 March 2011, 16:58:06 »

Quote

what was the mileage of the engine when this modifications were done?
how does the engine handle extra stress so far?

Engine was done at 91k its on 108k now and all is still well

But like i said i would like to get it mapped again soon.

fiend61 · « **Reply #14 on:** 14 March 2011, 22:35:33 »

love the car exterior looks fantastic and the engine well what can you say

and the other thing is it makes tracing the breather pipes a bit easier

robbo2345 · « **Reply #15 on:** 14 March 2011, 22:41:47 »

great looking motor that mate 8-)

twiglet · « **Reply #16 on:** 17 March 2011, 10:22:03 »

Awesome looking motor! It's good to see a Pre F/L looking so well!!

MV6Matt · « **Reply #17 on:** 17 March 2011, 20:00:48 »

That is one sweet mother of a Car!

When was your car at Courtenays in 2007?

Like the silicone hoses!
Where did you get the headlights from off the net? Let me know! (where they a straight swap?)

I love the Irmscher Badge on the grille - really suits it!

Nice! Nice! Nice!

Matthew

:y

Radar · « **Reply #18 on:** 18 March 2011, 10:00:20 »

That is ridiculously shiny! Great stuff

Thomas-Elite · « **Reply #19 on:** 18 March 2011, 17:35:43 »

Quote

That is one sweet mother of a Car!

When was your car at Courtenays in 2007?

Like the silicone hoses!
Where did you get the headlights from off the net? Let me know! (where they a straight swap?)

I love the Irmscher Badge on the grille - really suits it!

Nice! Nice! Nice!

Matthew :y

The lights were off ebay but that was back in 2007 as well so might not be getting sold anymore.

QunerJin · « **Reply #20 on:** 15 June 2011, 02:54:29 »

klever79 · « **Reply #21 on:** 15 June 2011, 08:59:00 »

love the car

VR4Dave · « **Reply #22 on:** 15 June 2011, 16:18:17 »

Have you had this long? Sure I've seen one similar recently on ebay.

Looks great

sneakypenguin · « **Reply #23 on:** 15 July 2011, 23:51:02 »

looks fantastic mate

feeutfo · « **Reply #24 on:** 18 July 2011, 00:37:53 »

Nice. Reminds me of this one.

Stallion · « **Reply #25 on:** 18 July 2011, 02:26:00 »

Stunning mate, keep up the shines. (how often do you put the coolant tank in the dishwasher)

Stallion · « **Reply #26 on:** 18 July 2011, 02:27:12 »

As for the pic above liking the alloys alot, is this omega owner still on the forum?

51M0N · « **Reply #27 on:** 20 July 2011, 18:28:12 »

hmmmm interesting. I'm guessing you've not had the work done?

I have not found a supplier for a lightened flywheel or stainless manifolds. few similar mods to mine enginewise except your bay is a lot cleaner and nice, ive not got round to mine yet.

lokking good

twiglet · « **Reply #28 on:** 20 July 2011, 21:50:48 »

Quote

hmmmm interesting. I'm guessing you've not had the work done?

I have not found a supplier for a lightened flywheel or stainless manifolds. few similar mods to mine enginewise except your bay is a lot cleaner and nice, ive not got round to mine yet.

lokking good

I can put you in touch with a top notch company for the flywheel mate.

51M0N · « **Reply #29 on:** 20 July 2011, 22:02:44 »

Quote

Quote
hmmmm interesting. I'm guessing you've not had the work done?

I have not found a supplier for a lightened flywheel or stainless manifolds. few similar mods to mine enginewise except your bay is a lot cleaner and nice, ive not got round to mine yet.

lokking good

I can put you in touch with a top notch company for the flywheel mate.

pm me

serek · « **Reply #30 on:** 21 July 2011, 22:36:11 »

very nice car lots work done on it

tigers_gonads · « **Reply #31 on:** 22 July 2011, 16:04:31 »

Have you got a better picture of those lights ?

I've a set of HID's for my pre facelift in pieces at the moment. ( need alloy adjusters )
The chrome paint is starting to peal off on both so i'm thinking about what I can do with them :-/

s7eve v6 24v · « **Reply #32 on:** 30 July 2011, 09:42:29 »

looks very good but you could do with some spacers on the rear wheels to bring them out a bit.looks a bit lost in the arches imo.

News:

Author Topic: My black body b elite. Courtny sports tuning (Read 7859 times)

Omega_Dan

feeutfo