Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: cdr-500 display problem  (Read 1695 times)

0 Members and 1 Guest are viewing this topic.

924boy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Rhuddlan, N. Wales
  • Posts: 160
    • View Profile
cdr-500 display problem
« on: 14 July 2009, 16:43:57 »
Hey, just tried putting the cdr500 out of my mig in my mk3 astra and all works except nothing comes up on the display. Tried it back in the mig and definately works fine on that display. the original car300 back in the astra works the display fine... am i missing something obvious here or does the cdr500 just not work the astra disply fullstop?
Logged

Dave DND

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • DND Services Ltd
  • Posts: 4216
    • Paignton, Devon
    • View Profile
    • DND Services Ltd
Re: cdr-500 display problem
« Reply #1 on: 14 July 2009, 17:02:30 »
Quote
Hey, just tried putting the cdr500 out of my mig in my mk3 astra and all works except nothing comes up on the display. Tried it back in the mig and definately works fine on that display. the original car300 back in the astra works the display fine... am i missing something obvious here or does the cdr500 just not work the astra disply fullstop?

Display Programming

There are two versions of Vauxhall vehicle displays, one with 8 Digits and one with 10 Digits. If you connect this stereo to the wrong display, code entry is possible, but the display will either freeze or dissappear once the code has been entered. To reprogram, Turn off the Radio, Press and Hold Presets "3" & "5" at the same time, whilst switching the radio back on, and this will toggle between the two display modes.

 :y
Logged
Radio & Decoding Technician
In Car Audio Service Department
www.dndservices.co.uk

924boy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Rhuddlan, N. Wales
  • Posts: 160
    • View Profile
Re: cdr-500 display problem
« Reply #2 on: 14 July 2009, 18:01:16 »
Cheers buddy, will give this a try now!  :y
Logged

924boy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Rhuddlan, N. Wales
  • Posts: 160
    • View Profile
Re: cdr-500 display problem
« Reply #3 on: 14 July 2009, 18:21:50 »
Just tried it bud but nowt happening... its been decoded so theres nothing happening at all cos of no code entry. it just works straight away on the radio but nothing on the display...  :(
Logged

Dave DND

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • DND Services Ltd
  • Posts: 4216
    • Paignton, Devon
    • View Profile
    • DND Services Ltd
Re: cdr-500 display problem
« Reply #4 on: 14 July 2009, 19:49:27 »
Which model CDR500 do you have? Delco, VDO, Siemens VDO, Grundig or Philips?

It may be that its a different set of buttons

2 & 4 are favourites also.
Logged
Radio & Decoding Technician
In Car Audio Service Department
www.dndservices.co.uk

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39483
    • ML350 TDM SmartRoadster
    • View Profile
Re: cdr-500 display problem
« Reply #5 on: 14 July 2009, 19:58:37 »
Quote
Quote
Hey, just tried putting the cdr500 out of my mig in my mk3 astra and all works except nothing comes up on the display. Tried it back in the mig and definately works fine on that display. the original car300 back in the astra works the display fine... am i missing something obvious here or does the cdr500 just not work the astra disply fullstop?

Display Programming

There are two versions of Vauxhall vehicle displays, one with 8 Digits and one with 10 Digits. If you connect this stereo to the wrong display, code entry is possible, but the display will either freeze or dissappear once the code has been entered. To reprogram, Turn off the Radio, Press and Hold Presets "3" & "5" at the same time, whilst switching the radio back on, and this will toggle between the two display modes.

 :y

I've just tried this with SWMBO's Astra witha VDO CDR5000 and will toggle using buttons 3 & 5
Why doesn't it seem to make a difference to the screen between 8 and 10 digits?  :-/
Logged

924boy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Rhuddlan, N. Wales
  • Posts: 160
    • View Profile
Re: cdr-500 display problem
« Reply #6 on: 14 July 2009, 20:04:43 »
Quote
Which model CDR500 do you have? Delco, VDO, Siemens VDO, Grundig or Philips?

It may be that its a different set of buttons

2 & 4 are favourites also.

its a delco, will give the other buttons a go...  :y
Logged

924boy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Rhuddlan, N. Wales
  • Posts: 160
    • View Profile
Re: cdr-500 display problem
« Reply #7 on: 14 July 2009, 20:11:32 »
it was 4 & 6 in the end. All done now tho, cheers for the help!  :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.025 seconds with 19 queries.