further to my recent post my barrel has locked again.I have tried spare keys but no joy.I had a new barrel fitted about 6000mls ago barrel from GM.Do I have to get locksmith out again.and will gm supply a new barrel to suit my keys. any ideas.
Just had an MOT,Passed I had an advisory vehicle underside has slight corrosion to suspension components and sills.Is it worth treating this or will it continue any way,today my steering lock came on never had that before, is it the heat, should I lubricate barrel with graphite powder or wd40 or leave alone
Tried the Lidl acrylic pink nail varnish remover it certainly works the only part that showed some damage was the mirror switch where it removed the black surface on the sharp edge.
Sorry if this is a silly question but where is my HBV. I have looked where it should be, under the scuttle, but see nothing like a plastic space ship.I assume I have one. 2003 2.6.
Outside dia. 36.00 mm base of groove, 30.8mm width of groove 3.8mm, O ring 3mm Bear in mind the O ring maybe crushed to some extent These are taken from an old tube and are the best measurements I could get.