Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Loom location  (Read 1134 times)

0 Members and 1 Guest are viewing this topic.

Migalot

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 734
    • Omega 2.6 2002
    • View Profile
Loom location
« on: 19 February 2023, 11:18:50 »
Since I'm not ready to crawl under the car yet, I thought I'd check the wiring from the O2 sensor connection to the ECU to see if a wire has been crimped. So, from the passenger side (Bank 2, Sensor 1) where does the cable route? Into the car's passenger footwell and along to the ECU on the driver's side (?) or in the engine compartment forward of the bulk and across?

Hope that makes sense!
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 28193
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Loom location
« Reply #1 on: 19 February 2023, 11:32:24 »
Along the gearbox, up over the bellhousing and into the engine loom ;)
Plugs are either side of the gearbox. And it has four sensors.
« Last Edit: 19 February 2023, 11:35:58 by Doctor Gollum »
Logged
Onanists always think outside the box.

Migalot

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 734
    • Omega 2.6 2002
    • View Profile
Re: Loom location
« Reply #2 on: 19 February 2023, 11:47:47 »
Quote from: Doctor Gollum on 19 February 2023, 11:32:24
Along the gearbox, up over the bellhousing and into the engine loom ;)
Plugs are either side of the gearbox. And it has four sensors.

 :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.029 seconds with 18 queries.