Topic: Cam cover gaskets - done (Read 967 times)

TheBoy · « **on:** 25 March 2007, 18:09:59 »

Right, finished at last

Took me more that "2hrs to do both sides" Mr DTM! And I only did one side, albeit the passenger one.

Seems to have stopped leaking

. Changed the plugs, and gave the throttle body up whilst I was at it. Have to try another 0 - 60 now

.

Flushed with success, though I would change the PAS belt on the Rover, but failed, as the effing idiots sold me the wrong belt

- going by the part numbers, I reckon new one is 5mm shorter.

STMO123 · « **Reply #1 on:** 25 March 2007, 18:15:56 »

Good job Jaime

Admin · « **Reply #2 on:** 25 March 2007, 18:19:34 »

Don't you just love Marks estimates of time to do a job!

He forgets we are mortal and NOT engineers....

TheBoy · « **Reply #3 on:** 25 March 2007, 18:22:38 »

And, I forgot, but I should thank Marks_DTM for advice - I had to give him yet another 'emergency call' part way through.

Markjay · « **Reply #4 on:** 25 March 2007, 18:43:01 »

Quote

...Took me more that "2hrs to do both sides" Mr DTM! And I only did one side, albeit the passenger one....

I'm doing it in a couple of weeks time...

Good job TB

Taxi_Driver · « **Reply #5 on:** 25 March 2007, 18:44:34 »

Top job

tunnie · « **Reply #6 on:** 25 March 2007, 19:16:38 »

good to hear its fixed