Omega Help Area > Omega General Help

Steering dust covers MOT advisories.

(1/1)

Mutha Jugs n Speed:
Took one of the 3.2's in for a MOT today, and got some advisories. i.e track rod end ball joint dust cover damaged or deteriorated X2,. Also Steering linkage ball joint dust cover damaged or deteriorated. So took a look on ebay, but came away clue less, as it seems that there appears to be a range of sizes. Any advice as to the correct items would be appreciated. TIA :y

dave the builder:
You CAN change dust covers on track rod ends BUT it requires removing the nut/breaking the taper free .
at which point you may as well replace the TRE especially if your also removing the steering linkage for boots ,or replacement
then the tracking will need doing .

inspect the boots , if they are not split (allowing the ingress of water ,an MOT FAIL )  the leave them be  ;)

If there is any play in joints ,replace the track rods ,steering links etc ,anything on it's way out ,in one go ,then get tracking done  ;)

Navigation

[0] Message Index