Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Steering dust covers MOT advisories.  (Read 300 times)

0 Members and 1 Guest are viewing this topic.

Mutha Jugs n Speed

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Out there?
  • Posts: 363
    • Nosey aint'cha
    • View Profile
Steering dust covers MOT advisories.
« on: 09 May 2024, 16:54:43 »
Took one of the 3.2's in for a MOT today, and got some advisories. i.e track rod end ball joint dust cover damaged or deteriorated X2,. Also Steering linkage ball joint dust cover damaged or deteriorated. So took a look on ebay, but came away clue less, as it seems that there appears to be a range of sizes. Any advice as to the correct items would be appreciated. TIA :y
Logged

dave the builder

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Derbyshire
  • Posts: 7793
    • omega b2 2.6 cdxi
    • View Profile
Re: Steering dust covers MOT advisories.
« Reply #1 on: 09 May 2024, 17:57:48 »
You CAN change dust covers on track rod ends BUT it requires removing the nut/breaking the taper free .
at which point you may as well replace the TRE especially if your also removing the steering linkage for boots ,or replacement
then the tracking will need doing .

inspect the boots , if they are not split (allowing the ingress of water ,an MOT FAIL )  the leave them be  ;)

If there is any play in joints ,replace the track rods ,steering links etc ,anything on it's way out ,in one go ,then get tracking done  ;)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.026 seconds with 22 queries.