Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: 05omegav6 on 14 February 2013, 10:47:37
-
Will be changing the front bumper on my car shortly. While doing that there's a couple of bits I need to fit behind the bumper, so am planning to install the LPG loom/ecu while I'm at it. I also have some dash wiring to do, so could conceivably fit the entire LPG electrickery :-\
So the question is: If I fit the Stag Ecu and loom, does it matter if I connect the petrol injection loom without connecting the 12v feed/leave the fuse out?
TIA, Al :y
-
No doesn't matter, so long as the weather doesn't get into the open plugs and cause corrosion.
(I never removed the bumper to fit mine btw) :)
-
Ta :y
Bumper coming off anyway ;)
-
Fit away... The LPG ECU is in the "pass through" state when without power :y
-
Fit away... The LPG ECU is in the "pass through" state when without power :y
:y