Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: tunnie on 28 December 2016, 10:41:42

Title: 3.2 Multiram Setup
Post by: tunnie on 28 December 2016, 10:41:42

I've broken the vac pipe that splits off back of the plenum, the section that runs off brake servo and runs into a joiner. When I changed HBV the little vac that runs off top of this split off.  :(

So need a whole new rear section I think, don't can it be easily replaced on its own?

http://s264.photobucket.com/user/tunnie_84/media/omega_stuff/BB1AF3B2-910B-446D-818C-E1821DE53DF6.jpg (http://s264.photobucket.com/user/tunnie_84/media/omega_stuff/BB1AF3B2-910B-446D-818C-E1821DE53DF6.jpg)

Title: Re: 3.2 Multiram Setup
Post by: tunnie on 28 December 2016, 10:42:56

http://s264.photobucket.com/user/tunnie_84/media/omega_stuff/BB1AF3B2-910B-446D-818C-E1821DE53DF6.jpg.html (http://s264.photobucket.com/user/tunnie_84/media/omega_stuff/BB1AF3B2-910B-446D-818C-E1821DE53DF6.jpg.html)

Fixed link

Title: Re: 3.2 Multiram Setup
Post by: zirk on 28 December 2016, 10:52:28

Theres a How To posts Pics up for Photobucket in the Newbie section, written by some chap called tunnie.  :-X ;)

(http://i264.photobucket.com/albums/ii177/tunnie_84/omega_stuff/BB1AF3B2-910B-446D-818C-E1821DE53DF6.jpg)

Title: Re: 3.2 Multiram Setup
Post by: tunnie on 28 December 2016, 11:05:27

 ;D ;D ;D

On my phone so just went quick and easy...

Title: Re: 3.2 Multiram Setup
Post by: TheBoy on 28 December 2016, 11:15:02

I might have just the valve bit. Need to work out how to separate, as I need to make one good pipe from 2 knackered ones.

Title: Re: 3.2 Multiram Setup
Post by: tunnie on 28 December 2016, 11:33:50

Thanks. Aiming to be in Brackers 7/8th Jan, I might need some of there pipe work as well, the thin stuff. Never worked out how all that plumbs together, sure I'm missing some.

As looking to get CamBelt replaced by that a Gixer fella.  :y

Title: Re: 3.2 Multiram Setup
Post by: TheBoy on 28 December 2016, 15:07:39

Quote from: tunnie on 28 December 2016, 11:33:50

Thanks. Aiming to be in Brackers 7/8th Jan, I might need some of there pipe work as well, the thin stuff. Never worked out how all that plumbs together, sure I'm missing some.

That DTM chap did a good guide. Most Omegas use later type with the 2 reservoirs.

Quote from: tunnie on 28 December 2016, 11:33:50

As looking to get CamBelt replaced by that a Gixer fella.  :y

He mentioned it yesterday when we were trying to strike up sufficient enthusiasm to do some cam cover gaskets...   ...before deciding far too cold!

Title: Re: 3.2 Multiram Setup
Post by: Nick W on 28 December 2016, 15:39:27

Quote from: TheBoy on 28 December 2016, 11:15:02

I might have just the valve bit. Need to work out how to separate, as I need to make one good pipe from 2 knackered ones.

Just buy some appropriate size vacuum hose, fit the one way valve into it and call it done. Just like dozens of Audis etc are repaired every week. Or custom servo installations are done.

Title: Re: 3.2 Multiram Setup
Post by: tunnie on 18 January 2017, 09:00:35

Still looking for this, I would like a complete setup from a V6 ideally. As I'm sure I've lost some pipework somewhere  :-\