Topic: 2.2 exhaust downpipe. (Read 518 times)

acura · « **on:** 17 January 2010, 17:24:05 »

Quick question chaps:

On separating the exhaust downpipe from the manifold on a 2.2 is there a bracket that needs to be released to push the exhaust down to clear the studs? If so where is it?

Cheers

arlee219 · « **Reply #1 on:** 17 January 2010, 18:26:22 »

PM Wellung666. He'll know how it goes

(After all he's a Master:) )

lee4206 · « **Reply #2 on:** 17 January 2010, 19:15:57 »

There is a bracket by the flex should be a 13mm headed bolt. Check the lamda cable isnt being steched as well.
Lee

Welung666 · « **Reply #3 on:** 17 January 2010, 20:39:42 »

Quote

There is a bracket by the flex should be a 13mm headed bolt. Check the lamda cable isnt being steched as well.
Lee

Correct

2.2 cats have 7 bolts - 4 on the manifold joint, 2 on the join the the centre section and 1 holding it solid to the gearbox crossmember. Then there are the 2 lambda plugs.

News:

Author Topic: 2.2 exhaust downpipe. (Read 518 times)

acura

2.2 exhaust downpipe.

arlee219

Re: 2.2 exhaust downpipe.

lee4206

Re: 2.2 exhaust downpipe.

Welung666

Re: 2.2 exhaust downpipe.