Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Andy B]

I wish I'd had chance to respond to the idea that I only had a CSE wood qualification to my name before the thread was locked. 

[YZ250]

I always had you down as an (ex) Engineer in the Royal Navy, not carving out the ships, but hey ho. 

Rangie's thread went off track so he'll have to start a new one when he's completed his course. An OOF thread going off topic, how unusual. 

[Andy B]

I always had you down as an (ex) Engineer in the Royal Navy, not carving out the ships, but hey ho. 

Rangie's thread went off track so he'll have to start a new one when he's completed his course. An OOF thread going off topic, how unusual. 

Thanks for that ..... Indeed, they'd stopped hoisting the main engines a good few years before I signed on the dotted line 

[Doctor Gollum]

I wish I'd had chance to respond to the idea that I only had a CSE wood qualification to my name before the thread was locked. 

Sorry about that. I reported it as out of 37 posts, 35 of them have been deliberately inflammatory. Long overdue a permanent ban imho

[Andy B]

I wish I'd had chance to respond to the idea that I only had a CSE wood qualification to my name before the thread was locked. 

Sorry about that. I reported it as out of 37 posts, 35 of them have been deliberately inflammatory. Long overdue a permanent ban imho

No worries Al 
Does an A in metalwork O level trump a CSE in wood work? 

[Doctor Gollum]

I wish I'd had chance to respond to the idea that I only had a CSE wood qualification to my name before the thread was locked. 

Sorry about that. I reported it as out of 37 posts, 35 of them have been deliberately inflammatory. Long overdue a permanent ban imho

No worries Al 
Does an A in metalwork O level trump a CSE in wood work? 

You would certainly like to think so

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

[Andy B]

.....

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

 

[Migv6 le Frog Fan]

What are these qualification things of which you speak ?

[YZ250]

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

Not whilst on the phone I hope.     

[dave the builder]

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

Not whilst on the phone I hope.     

and observing the speed limit 

[STEMO]

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

Not whilst on the phone I hope.     

and observing the speed limit 

Struggling to remember the last time I did that. 

[Sir Tigger KC]

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

Not whilst on the phone I hope.     

I'd imagine he has a hand held walkie-talkie so his boss can yell "Oi Al! Get outa the way of that fickin 747 that's about to land on you!" 

[Doctor Gollum]

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

Not whilst on the phone I hope.     

I'd imagine he has a hand held walkie-talkie so his boss can yell "Oi Al! Get outa the way of that fickin 747 that's about to land on you!" 

Actually need four hands... One two steer, one to change gear, one to operate the gubbins and one to answer the two radios

All whilst doing 40km/h a foot off the rear corner of the plough ahead.

All this distracted driving nonsense is, er, nonsense 

[Andy B]

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

Not whilst on the phone I hope.     

I'd imagine he has a hand held walkie-talkie so his boss can yell "Oi Al! Get outa the way of that fickin 747 that's about to land on you!" 

Actually need four hands... One two steer, one to change gear, one to operate the gubbins and one to answer the two radios

All whilst doing 40km/h a foot off the rear corner of the plough ahead.

All this distracted driving nonsense is, er, nonsense 

 

[Andy B]

I liked the bus (dolmush sp?)  drivers in Turkey ... they drove, collected fares, gave change, spoke to passengers all while on a hand held phone! 

With about 30 passengers in a 12 seater minibus

[STEMO]

I liked the bus (dolmush sp?)  drivers in Turkey ... they drove, collected fares, gave change, spoke to passengers all while on a hand held phone! 

With about 30 passengers in a 12 seater minibus

None on the roof? Indian bus drivers would show them a thing or two 

[Andy B]

I liked the bus (dolmush sp?)  drivers in Turkey ... they drove, collected fares, gave change, spoke to passengers all while on a hand held phone! 

With about 30 passengers in a 12 seater minibus

None on the roof? Indian bus drivers would show them a thing or two 

 

[Rangie]

I always had you down as an (ex) Engineer in the Royal Navy, not carving out the ships, but hey ho. 

Rangie's thread went off track so he'll have to start a new one when he's completed his course. An OOF thread going off topic, how unusual. 

.   

The last one I did at least 10 years ago the course presenter asked each attendee what vehicle they were driving when I replied a Subaru he simply raised his eyebrows,  Range Rover should go down equally as well its nice & early in the morning in December & there's a lovely pub near the venue so a nice lunch  afterwards for me & wifey , may even pop into Peterborough afterwards as she's hinted what she wants for Christmas, Andy B do you do any carvings ? Only I thought a nice plaque with the date of the course would look good on the garage wall..
😃😄😆

[biggriffin]

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

Not whilst on the phone I hope.     

I'd imagine he has a hand held walkie-talkie so his boss can yell "Oi Al! Get outa the way of that fickin 747 that's about to land on you!" 

Actually need four hands... One two steer, one to change gear, one to operate the gubbins and one to answer the two radios

All whilst doing 40km/h a foot off the rear corner of the plough ahead.

All this distracted driving nonsense is, er, nonsense 

A professional driver, should  also be drinking a coffee whilst doing that

[Sir Tigger KC]

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

Not whilst on the phone I hope.     

I'd imagine he has a hand held walkie-talkie so his boss can yell "Oi Al! Get outa the way of that fickin 747 that's about to land on you!" 

Actually need four hands... One two steer, one to change gear, one to operate the gubbins and one to answer the two radios

All whilst doing 40km/h a foot off the rear corner of the plough ahead.

All this distracted driving nonsense is, er, nonsense 

A professional driver, should  also be drinking a coffee and pee'ing into a bottle whilst doing all that

Fixed! 

[Andy B]

....
 Andy B do you do any carvings ? Only I thought a nice plaque with the date of the course would look good on the garage wall..
😃😄😆

  I'd make a better job out of stainless steel 

[Entwood]

I wish I'd had chance to respond to the idea that I only had a CSE wood qualification to my name before the thread was locked. 

Sorry about that. I reported it as out of 37 posts, 35 of them have been deliberately inflammatory. Long overdue a permanent ban imho

No worries Al 
Does an A in metalwork O level trump a CSE in wood work? 

You would certainly like to think so

I know there aren't many other people qualified to drive a snow plough down a live runway, so there's also that...

Which is nice.

I wasn't qualified to drive a snowplough, but it seems I was qualified to operate one of these monstrosities ...  "MRD" - Mechanical Runway Deicer



2 Derwent jet engines strapped to the front of a 3000 litre fuel bowser.. limited to 60% power or you blew the bowser backwards ... did more damage by melting /lifting/blasting off large lumps of tarmac than anything else... generally melted lying snow which instantly re-froze to sheet ice .....  bloody stupid system .. but as a young Air Eng it was "get out there and do it ..... "   

[Rangie]

....
 Andy B do you do any carvings ? Only I thought a nice plaque with the date of the course would look good on the garage wall..
😃😄😆

  I'd make a better job out of stainless steel 

.     



How about a metal disc that I can cover the lens of the speed camera in question ? Or should I leave it to whoever it is round this way setting fire to them ? 😁

[Doctor Gollum]

What could possibly go wrong?

[Andy B]

....
 Andy B do you do any carvings ? Only I thought a nice plaque with the date of the course would look good on the garage wall..
😃😄😆

  I'd make a better job out of stainless steel 

.     



How about a metal disc that I can cover the lens of the speed camera in question ? Or should I leave it to whoever it is round this way setting fire to them ? 😁

A burning tyre should do the trick

[Doctor Gollum]

They tend to use chainsaws around here...

[Rangie]

That is exactly what has been happening round here , one of the cameras is right by the tyre shop 😁

[Nick W]

Actually need four hands... One two steer, one to change gear, one to operate the gubbins and one to answer the two radios

All whilst doing 40km/h a foot off the rear corner of the plough ahead.

All this distracted driving nonsense is, er, nonsense 

no it's true.
I know you've met the general public; many of them are easily distracted by their own breathing. Having to employ physical skills and make conscious decisions at the same time is beyond them

[Doctor Gollum]

That's why women can multitask...

Unfortunately they lack the critical thinking skills to be able to prioritise reading the road ahead of Snapchat