1
Omega Electrical and Audio Help / Re: Headlights
« on: 17 April 2008, 10:11:00 »
Chris I'll have it off you, will send a PM
Bruce
Bruce
- 27 April 2024, 08:35:13
- Welcome, Guest
News:
Welcome to OOF
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Omega Electrical and Audio Help / Re: Headlights
« on: 15 April 2008, 20:44:35 »
Hi Chris
Thanks for all your help mate..It was the R/H Drivers side that went, but never mind my brother has said he may be able to sort me out with some...wish the f**k he had told me this before I bought these ones off of ebay..
Anyway thanks again Chris
PS..Chris forget this post my so called brother now says he don't have the right ones for my car..I have posted on the parts for sale forum in your thread about your Elite
Bruce
Thanks for all your help mate..It was the R/H Drivers side that went, but never mind my brother has said he may be able to sort me out with some...wish the f**k he had told me this before I bought these ones off of ebay..
Anyway thanks again Chris
PS..Chris forget this post my so called brother now says he don't have the right ones for my car..I have posted on the parts for sale forum in your thread about your Elite
Bruce
3
Omega Electrical and Audio Help / Re: Headlights
« on: 15 April 2008, 19:12:35 »
Hi Chris.
I'v just taken the red and black plug and bulb off the old one and there's no way the bulb and fitting it is going to fit the new headlight..on the new one there is just a hole where the bulb goes and a spring clip to hold it in and the two wires ..live and earth..brown earth and yellow live. and there is no silver box underneath, but all the holes where it should be are there
I brought them because the reflector in one was moving about and had dropped down inside..
Can the new ones still work without all the bits that are on the old ones..one thing these new ones have is the lens is held on with metal clips
ebay link..sorry it's so long.
http://cgi.ebay.co.uk/Vauxhall-Omega-1997-1999-Headlight-Lamp-Brand-New_W0QQitemZ200215284250QQihZ010QQcategoryZ10404QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I'v just taken the red and black plug and bulb off the old one and there's no way the bulb and fitting it is going to fit the new headlight..on the new one there is just a hole where the bulb goes and a spring clip to hold it in and the two wires ..live and earth..brown earth and yellow live. and there is no silver box underneath, but all the holes where it should be are there
I brought them because the reflector in one was moving about and had dropped down inside..
Can the new ones still work without all the bits that are on the old ones..one thing these new ones have is the lens is held on with metal clips
ebay link..sorry it's so long.
http://cgi.ebay.co.uk/Vauxhall-Omega-1997-1999-Headlight-Lamp-Brand-New_W0QQitemZ200215284250QQihZ010QQcategoryZ10404QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
4
Omega Electrical and Audio Help / Headlights
« on: 15 April 2008, 17:57:52 »
Please excuse me if I don't explain this to well.. 
Right here goes..I brought two headlights off of Ebay, not Vauxhall but identical to the originals I have on my 98 2.5 elite, trouble is on the originals there is this cap with three screws holding it in place and under this is a red and black plug..will this fit the ones I brought off ebay which have all the same holes and grooves..in fact this red and black plug seem to be the only difference.. also is there a bulb under this red and black plug ??
Or have I brought a heap of s**t
hope not 
Love the Haynes Manual which says "remove three screws and remove headlight" Yea.. like f**k it does..
Bruce
Right here goes..I brought two headlights off of Ebay, not Vauxhall but identical to the originals I have on my 98 2.5 elite, trouble is on the originals there is this cap with three screws holding it in place and under this is a red and black plug..will this fit the ones I brought off ebay which have all the same holes and grooves..in fact this red and black plug seem to be the only difference.. also is there a bulb under this red and black plug ??
Or have I brought a heap of s**t
hope not Love the Haynes Manual which says "remove three screws and remove headlight" Yea.. like f**k it does..
Bruce
5
Omega Electrical and Audio Help / Re: What Bulb ?
« on: 19 March 2008, 11:11:06 »
Cheers Andy, Your a diamond, and thanks for the tip..just my luck it's the passengers side that's gone.. 
Bruce
Edit: I'v just become a Junior Member with this post 8-) how cool is that.
Bruce
Edit: I'v just become a Junior Member with this post 8-) how cool is that.
6
Omega Electrical and Audio Help / What Bulb ?
« on: 19 March 2008, 10:49:06 »
Could a member please tell me what parking light bulb I need for my 98 2.5 elite, It will save me taking the battery out and replacing it twice..I did see a bulb list on the site, but can't seem to find it now.
Cheers
Bruce
Cheers
Bruce
7
Omega Electrical and Audio Help / Re: Aerial Lead
« on: 15 January 2008, 08:59:40 »
Cheers Andy
Bruce.
PS..I must remember to log out at night..sorry guys
Bruce.
PS..I must remember to log out at night..sorry guys
8
Omega Electrical and Audio Help / Re: Aerial Lead
« on: 14 January 2008, 09:25:56 »
My aerial plug came off the end of the cable and I thought that was it..but after reading this thread it seems I can change it.. this "kick panel" where and exactly what is it on my 98 2.5 Elite ...
Thanks in advance for any information
Bruce
Thanks in advance for any information
Bruce
9
Omega General Help / Re: Climate control-do I have a problem
« on: 09 July 2008, 08:24:33 »
Mine has these "--"after changing the bulbs in the panel, I'v disconnected the battery more than once for different jobs I'v done on the car since it started but it still shows after connecting the battery back up
Bruce
Bruce
11
Omega General Help / Re: Sanity check - scuttle drain
« on: 02 July 2008, 13:59:01 »
I used this guide to clean my drain out, worked a treat.
http://www.omegaowners.com/forum/YaBB.pl?num=1167524083
Bruce
http://www.omegaowners.com/forum/YaBB.pl?num=1167524083
Bruce
12
Omega General Help / Re: Elite front door
« on: 15 June 2008, 16:54:15 »
Dave,
The airbags are not in the doors, they are in the drivers and passengers back rest, if you have a look at the sides of the back rest you'll see the panel's, it's the airbag sensor that's in the door.
The airbags are not in the doors, they are in the drivers and passengers back rest, if you have a look at the sides of the back rest you'll see the panel's, it's the airbag sensor that's in the door.
13
Omega General Help / Re: Removal of headlamp covers
« on: 16 June 2008, 22:22:40 »
The lens can be taken off fairly easy..you need a hot air gun, I used the wife's air drier played around the lens edge where the black glue is..and made one good HID headlight from two F***ed up ones.
Bruce
Bruce
14
Omega General Help / Re: Climate Control Bulbs
« on: 08 June 2008, 06:06:45 »
The bar in the Photo with the red arrow is the bar your looking for..the round bar like a piece of "welding wire" that you are pulling on is further back and has nothing to do with removing the panel.
Try holding a small mirror in there to see where the bar is.
A tip : when you have the panel out...put a cable tie around the bar before the panel goes back in, then if you need to have the panel out again just pull on the cable tie.
http://www.omegaowners.com/forum/YaBB.pl?num=1162120610
Try holding a small mirror in there to see where the bar is.
A tip : when you have the panel out...put a cable tie around the bar before the panel goes back in, then if you need to have the panel out again just pull on the cable tie.
http://www.omegaowners.com/forum/YaBB.pl?num=1162120610
15
Omega General Help / Re: Fitting a new door actuator
« on: 27 May 2008, 17:42:35 »Quote
Passenger side isn't too bad, I did it in about an hour. Once you have removed the door handle and took the three torq screws off you can manouvre the whole unit to the opening in the door and just unscrew the two screws without removing and unclipping everything.
Worth reading this before attempting to remove the door card:-
http://www.omegaowners.com/forum/YaBB.pl?num=1152953579
This what I did..also the solenoid's are universal. I took mine from a O/S scrap door and put it in the N/S door on my car, just needs turning around
Bruce