Omega Owners Forum
Chat Area => Meetings, gatherings, parties etc => Topic started by: VX1 on 28 February 2008, 15:41:30
-
Has this past or has there been a date set yet?
Paul :y
-
Has this past or has there been a date set yet?
Paul :y
I will contact Wheels-InMotion again, last I heard was there was a couple of delays with getting the centre ready.
-
Has this past or has there been a date set yet?
Paul :y
I will contact Wheels-InMotion again, last I heard was there was a couple of delays with getting the centre ready.
Any joy with dates :question
-
I think he's still struggling with the new unit, last I heard he was waiting for the shutters to be fitted.
-
I was down there the other day to have a little look around. I must say, looks very impressive, and WIMs plans are equally impressive.
Speaking to Tony, if all goes to plan, the centre should be opening around the end of the month - assuming that the roller doors get in on time, and the 1st floor extension gets done very soon.
OOF have 2 'invititation' days - the first will be the official Open Day, open to all clubs that WIM is involved with - Lexus OC, Mazda OC, OOF and so on. This will be just a look around, trying to understand what WIM's capabilities are, and generally learn more about WIM. Refreshments will be laid on, courtesy of WIM. This is likely to be a Sunday fairly soon after opening.
The 2nd invitation day will be for OOF members only. This is being classed as a knowledge/learning day, and will see WIM in action. The idea is for members to learn and understand Omega's geometry, and learn what goes wrong with it. All attendees names will be put in a hat, and pulled out at random. These lucky people pulled from the hat will have their car geometry set up for free on the day. Again, refreshments will be laid on by WIM. This is likely to happen a few weeks after opening depending when we can slot in, and will likely be a Sunday again.
-
I doubt I'll be able to make either .. but I sincerely wish the guy the greatest of luck .. he surely deserves it .. and as much support as OOF members can give him.
Lets face it .. he's helped out enough folks with problems
-
I was down there the other day to have a little look around. I must say, looks very impressive, and WIMs plans are equally impressive.
Speaking to Tony, if all goes to plan, the centre should be opening around the end of the month - assuming that the roller doors get in on time, and the 1st floor extension gets done very soon.
OOF have 2 'invititation' days - the first will be the official Open Day, open to all clubs that WIM is involved with - Lexus OC, Mazda OC, OOF and so on. This will be just a look around, trying to understand what WIM's capabilities are, and generally learn more about WIM. Refreshments will be laid on, courtesy of WIM. This is likely to be a Sunday fairly soon after opening.
The 2nd invitation day will be for OOF members only. This is being classed as a knowledge/learning day, and will see WIM in action. The idea is for members to learn and understand Omega's geometry, and learn what goes wrong with it. All attendees names will be put in a hat, and pulled out at random. These lucky people pulled from the hat will have their car geometry set up for free on the day. Again, refreshments will be laid on by WIM. This is likely to happen a few weeks after opening depending when we can slot in, and will likely be a Sunday again.
Thanks for the update TB :y :y :y
-
Yes TB thanks for the update :y I will let my dad know as well so he can get down there considering he only lives half a mile away,so he can understand it as well.
-
I was down there the other day to have a little look around. I must say, looks very impressive, and WIMs plans are equally impressive.
Speaking to Tony, if all goes to plan, the centre should be opening around the end of the month - assuming that the roller doors get in on time, and the 1st floor extension gets done very soon.
OOF have 2 'invititation' days - the first will be the official Open Day, open to all clubs that WIM is involved with - Lexus OC, Mazda OC, OOF and so on. This will be just a look around, trying to understand what WIM's capabilities are, and generally learn more about WIM. Refreshments will be laid on, courtesy of WIM. This is likely to be a Sunday fairly soon after opening.
The 2nd invitation day will be for OOF members only. This is being classed as a knowledge/learning day, and will see WIM in action. The idea is for members to learn and understand Omega's geometry, and learn what goes wrong with it. All attendees names will be put in a hat, and pulled out at random. These lucky people pulled from the hat will have their car geometry set up for free on the day. Again, refreshments will be laid on by WIM. This is likely to happen a few weeks after opening depending when we can slot in, and will likely be a Sunday again.
Is a list of names who will be attending being posted? :y
-
there is not any real point until we know the date yet..... other wise it will end up like the lakes meet (a list of people with no date of attandance. :() the list would change too much.
let just wait until TB lets us know when! :) :)
cheers for the update Jaime
-
whereabouts are the wim premises?
-
whereabouts are the wim premises?
Chesham, South Bucks.
-
there is not any real point until we know the date yet..... other wise it will end up like the lakes meet (a list of people with no date of attandance. :() the list would change too much.
let just wait until TB lets us know when! :) :)
cheers for the update Jaime
But I can go any time :P
-
Any news yet Jamie?
Paul
-
I need mine doing baaaaaaaaaaaaaaaaaaad!!!
-
I need mine doing baaaaaaaaaaaaaaaaaaad!!!
The floor was due to go in today, once that is in, things can really start moving at last.
I hope its soon ready - I have a tractor that defo needs a chat with WIM
-
I need mine doing baaaaaaaaaaaaaaaaaaad!!!
The floor was due to go in today, once that is in, things can really start moving at last.
I hope its soon ready - I have a tractor that defo needs a chat with WIM
Looking forward to it, i spoke with Tony a while ago now on the phone, gonna be well worth the trip.
-
Any news yet??? have we got a date.
-
The centre appears to be moving along now, and aims to be opening to public on 21st April. Based on that, I would suggest we are looking at May...
-
WIM are holding their open day on Sunday 25th May. This is the main open day event, all clubs are invited, more details about the days events to follow. Watch this space!
This is NOT the knowledge day, that date has yet to be set.