Hi Guys,
I got small problem .
I started on cleaning and servicing the 2.2 omega and when to came to the rocker gasket...
I pull the ignition coil - the spark plugs were full right up to the rocker cover with old oil, a little bit cocked .
so I started sucking that oil and trying to clean what i can but, its still some sh..e on the bottom.
i cleaned everything as much as i thought be ok and put new gasket , cleaning throttle, new thermostat ,new filters etc.
and started -- bang 30000 fault codes came up. and big misfire.
took the cil back again and put some electric cleaner - and a lot better but still 2 codes p0354 and p0302
and works like a tractor.
I sprayed quite a lot of electric connector cleaner were the spark plugs are , and I think no.2 leaked a bit inside
Now my question how to clean everything right up to make sure when I take spark plugs out no shite go down the hole ?
some of the pic. first one with still some oil but cleaned like 0.5 litre out already.