Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Engine and gearbox change 2.6 to 3.2  (Read 1653 times)

0 Members and 1 Guest are viewing this topic.

GrahamK

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 189
  • 2003 2.6 CDX Saloon
    • View Profile
Engine and gearbox change 2.6 to 3.2
« on: 01 May 2021, 10:50:22 »

Hi all,
I've recently picked up a 3.2 engine and AR35 gearbox and I'm planning a DIY engine change.

Will the ancillaries off my 2.6 fit and work correctly with the 3.2?

I have the 3.2 plenum but I am particularly interested in issues for the throttle body, MAF?

Are there any other issues regarding the swap that I need to be aware of?

I understand that the final drive is different on the 2.6, but have seen threads here discussing the 3.2 with its standard (Auto) Diff is considered a little high geared, so this may be a positive. If there are any other views on this, I would be interested to hear.

Regards,

Graham.



Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 28089
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #1 on: 01 May 2021, 11:56:57 »

Just fit it as is and keep your ecu.

No point overcomplicating it.
Logged
Onanists always think outside the box.

biggriffin

  • Omega Lord
  • *****
  • Offline Offline
  • huntingdon, Hoof'land
  • Posts: 9739
    • Vectra in a posh frock.
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #2 on: 01 May 2021, 16:57:53 »

Remove 2.6 and ar25, fit 3.2 and ar35, job done.
Logged
Hoof'land storeman.

Migv6 le Frog Fan

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Webs End.
  • Posts: 11733
  • Nicole's Papa
    • 3.2 Elite. Boxster. C1.
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #3 on: 01 May 2021, 18:44:06 »

I thought the 2.6 / 3.2 ECU were different from one another ?  :-\
Logged
Women are like an AR35. lovely things, but nobody really understands how they work.

biggriffin

  • Omega Lord
  • *****
  • Offline Offline
  • huntingdon, Hoof'land
  • Posts: 9739
    • Vectra in a posh frock.
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #4 on: 01 May 2021, 19:13:52 »

I thought the 2.6 / 3.2 ECU were different from one another ?  :-\

 Changing ecu creates even more problems, needing tech2, unless you have the key,transponder, door controller etc.
Logged
Hoof'land storeman.

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 28089
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #5 on: 02 May 2021, 11:54:31 »

I thought the 2.6 / 3.2 ECU were different from one another ?  :-\
Nope, both v6 dbw. Fuelling is self adjusting via the MAF, so capacity difference is largely irrelevant.  :y

As BG has pointed out, swapping the ecu is a much more that it seems. Not difficult, just a ball ache if you don't have ALL the items required.
Logged
Onanists always think outside the box.

GrahamK

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 189
  • 2003 2.6 CDX Saloon
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #6 on: 02 May 2021, 15:50:25 »

Hi all,

Thanks for the replies.

I'm not looking to overcomplicate matters, just fore arm so to speak.

I understand that the fuelling self regulates, but I am a little surprised that the throttle bodies and/or the MAF's are not a different size. The jump from 2.6 to 3.2 is more than a 20% increase in capacity and I would have thought that might have been reflected in the size of something. Thinking about carb venturi sizes and how they used to go up with higher capacity engines, sometimes quite markedly. Perhaps it is more a matter of making a single throttle body that can flow sufficient for all the engines in the range?

More than anything, If I do this change I want to yield all the extra power that appears on paper and not limit the output by overlooking some small detail.

Of course, I'm not a racer and the Omega is far from a sports car but the 3.2's I have driven were a fair bit spritelier than the 2.6. Had I been able to find a 3.2 worth the money I would have gone for it, but I bought on condition mainly. It's also a fun project and I like the idea! Anyway, I've bought an engine hoist now so I suppose I'd better do it.

Regards,

Graham.
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36266
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #7 on: 03 May 2021, 08:44:03 »

On a fuel injected car there doesn't need to be a venturi and the throttle body is really just an air valve so these items could be made identical across the range of engine size.

I seem to recall there was a change in either the injctor flow rate or fuel pressure so might be work keeping the injectors and fuel rail from the 3.2.

As said, there won't be enough difference in the fuel and ignition maps to warrant the pain of swapping the ECU over so just leave the 2.6 one.
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 28089
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #8 on: 03 May 2021, 13:37:29 »

To Kevin's point, the fuel rail and FPR are identical, as are the fuel pumps ;)
Logged
Onanists always think outside the box.

biggriffin

  • Omega Lord
  • *****
  • Offline Offline
  • huntingdon, Hoof'land
  • Posts: 9739
    • Vectra in a posh frock.
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #9 on: 03 May 2021, 14:37:49 »

And yes you can put engine and gearbox in as 1 piece. :y
Logged
Hoof'land storeman.

GrahamK

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 189
  • 2003 2.6 CDX Saloon
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #10 on: 03 May 2021, 17:48:12 »

yes, as one piece, absolutely.
I have done a cambelt on an Omega before and although it was straightforward really, it had my full attention. It also took about 2 months for the scars to clear from my forearms as they were shredded in the process.
I'm looking forward to doing the essentials on both engine and gearbox whilst on the bench.
Please see my new thread on which essentials.

Cheers all.

Graham.
Logged

Nick W

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chatham, Kent
  • Posts: 10836
  • Rover Metro 1.8VVC
    • 3.0l Elite estate
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #11 on: 03 May 2021, 18:46:22 »

yes, as one piece, absolutely.
I have done a cambelt on an Omega before and although it was straightforward really, it had my full attention. It also took about 2 months for the scars to clear from my forearms as they were shredded in the process.
I'm looking forward to doing the essentials on both engine and gearbox whilst on the bench.
Please see my new thread on which essentials.

Cheers all.

Graham.


if the engine isn't in the car, you should seriously consider changing the rear crankshaft seal. The front is probably easier in the car as it takes a lot of effort to undo the crank pulley bolt
Logged

GrahamK

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 189
  • 2003 2.6 CDX Saloon
    • View Profile
Re: Engine and gearbox change 2.6 to 3.2
« Reply #12 on: 04 May 2021, 14:13:44 »

Yes, cheers.

Graham.
Logged
Pages: [1]   Go Up
 

Page created in 0.026 seconds with 19 queries.