Omega Owners Forum
Chat Area => General Car Chat => Topic started by: VXL V6 on 24 June 2018, 21:48:12
-
Work on the project car today -
SKF Cambelt kit
SKF auxbelt kit
SKF Waterpump
GM thermostat
GM transfer pipe
Eibach front springs
B4 front shocks
Lemforder wishbones
Poweflex poly front bushes
Meyle HD droplinks
Pedders uprated Monaro top mounts
Febi friction bearings
Refurbished calipers and brackets
GM genuine pads
GM pad wear sensor
All done in the blistering heat.
A huge thanks for all the work acomplished, it's so close now to go for an MOT and fially getting it on the road. :y
-
That's a good days work ! He may be an ugly bastid, but he can graft. :y :D
-
Work on the project car today -
SKF Cambelt kit
SKF auxbelt kit
SKF Waterpump
GM thermostat
GM transfer pipe
Eibach front springs
B4 front shocks
Lemforder wishbones
Poweflex poly front bushes
Meyle HD droplinks
Pedders uprated Monaro top mounts
Febi friction bearings
Refurbished calipers and brackets
GM genuine pads
GM pad wear sensor
All done in the blistering heat.
A huge thanks for all the work acomplished, it's so close now to go for an MOT and fially getting it on the road. :y
Well he has to sweat off all that cheap Italian plonk he's been supping somehow ;D
-
ruddy good amount done in one day, there! Nice one!
-
Just to put a few things straight for you ode timers..... Ugly is something I am not... gifted in that section am I lmao
And cheap plonk in Italy??? Someone has to be joking lmao... however we did keep going back for more!! Not sure your supposed to drink wine like that lmfao
-
Oh.... bye the way.... Your welcome Andy although extremely sun burnt am I pmsl xxx
-
.... Never let the apprentice build the struts..... 'errrrrr Daz, I haven't put that cup washer on that way up on the other side.....
Sorry :[ :D
-
.... Never let the apprentice build the struts..... 'errrrrr Daz, I haven't put that cup washer on that way up on the other side.....
Sorry :[ :D
I know... and how calm was I... if it had been an apprentice at work he would have had a right ear battering lmao
-
Sounds like a productive day's work - and Darth Loo-knee, for all his ugliness, does a bloody good job, and I would highly recommend him.
Does mean you have to listen to Rick Astley on continuous repeat though, but its a price worth paying.
-
Sounds like a productive day's work - and Darth Loo-knee, for all his ugliness, does a bloody good job, and I would highly recommend him.
Does mean you have to listen to Rick Astley on continuous repeat though, but its a price worth paying.
Lmfao... listen to James Arthur as well as Rick these days....
In fact going see James Arthur next month... if your interested like xx
-
In fact going see James Arthur next month... if your interested like xx
Oh no, DLK is trying to groom me :'(
:P
-
In fact going see James Arthur next month... if your interested like xx
Oh no, DLK is trying to groom me :'(
:P
Sounds like a date to me. :y
.. followed by a romantic Naga for two at Tiffins? :D
-
...and another visit from Daz today - Replaced original donut bushes with polly ones, one side was an absolute bastard to remove :(
New discs, pads and calipers on the rear and fresh coolant.
Need to get it insured and booked in for an MOT now!
-
Lovely motor that mate... Black Omegas are my Favourite I have to say....
-
Lovely motor that mate... Black Omegas are my Favourite I have to say....
When are you coming to bend over my bonnet?
-
Name your day Handsome!!!
-
Name your day Handsome!!!
You've only ever seen me from behind. ;D
-
Lovely motor that mate... Black Omegas are my Favourite I have to say....
Why? They don't show ya mucky prints ;D
-
Booked in for MOT on Monday now ::) :)