Omega Owners Forum
Omega Help Area => Maintenance Guides => Topic started by: TheBoy on 16 April 2007, 20:58:36
-
For CAR400/CCR600/CCR800 range of radios, it is possible that it may be configured for the wrong number of digits for the display.
Some displays, earlier MIDs for example, have 8 digits, later ones have 10. The radio needs to be configured for this.
For change the setting:
Ignition on, radio off.
Press and hold 4 & 6 and keep held.
Switch on radio, and use the < > buttons to select the number of digits *. Each press of < or > should give a beep.
Release 4 & 6 to store.
* You may not be able to read display, but it toggles through 8 digit/10 digit or 8 digit/2+8 digit/10 digit depending on actual hardware/software.