Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - jimbo1977

Pages: [1]
1
Omega General Help / Re: Shock went into the boot
« on: 09 December 2022, 22:05:52 »
ive now got a urge to go and check around my rear shocks now !!  :o

2
Test Zone / Re: z22xe running problems
« on: 08 October 2022, 06:07:24 »
hi just a update , time and weather were against me so i let my local garage do the HG , after having a final look myself after a run and taking the plugs out no 3 had water in , pretty conclusive ! also had water pump / CB and gubbings replaced . the only slight running issue now in a hairline crack on the top of the exhaust manifold . MOT due soon needs new arms , d & p all round and few other smalls , also been advised to scrub and repaint the sills . thanks for help and advice guys will post again soon :)

3
Test Zone / Re: z22xe running problems
« on: 28 August 2022, 03:01:41 »
hi dave , thanks for the reply  :) unsure if i can do pressure test as header tank has got a small split in near the cap , again making me think its HG with hot gasses  entering the cooling system and its been doing the bubbling up at times when ive taken the cap off , possibly damaged the tank ? like i said i want to do the HG anyway so i know its good , kits already here for that ive just got to order new cam belt n water pump hopefully will get it finished just in time for MOT in october . im wondering if its had that K seal stuff put in at sometime  ;D guess i will find out soon

thanks .... richard

4
Test Zone / z22xe running problems
« on: 25 August 2022, 19:54:23 »
hi my 2.2 cdx Z22XE has been chilling in the garage through the very hot weather , took it to garage to sort out the slight blowing from the cat-manifold joint . nice and easy however , on checking the oil i found that it had gone milky so did oil and filter change straight away , did the gasket on the exhaust joint finding it didnt make any difference when done as .015 feeler guages still fit through the gap and i didnt have any type of paste so will need to redo . on driving back to bed , is running like theres oil in the plug wells ( they are bone dry been checking regularly ) and there also seems to be a sloshing sound !!! the only other thing i did that day was connected the after cat sensor as i noticed that was unplugged .. im leaning towards doing the head gasket ( which i want to do anyway at some point so i know its good ) as it seems to have been drinking coolant as well . i know it could be running like a sack because of false pressure readings at manifold due to leak ... ive also got new cam sensor and coolant valve ready to go on as i thought loss of coolant was the valve at the back . i will redo the exhaust with paste ! and switch out the cam sensor and water switch ( is it hbv valve or something ) . has anybody got any other ideas as what the issues could be ? im 60% sure its a head gasket job even tho only on 67000 miles it has been used for towing .

iyl do the minor possibles first then if need be crack on with the head gasket .

5
Newbie Welcome Area / hellol
« on: 19 April 2022, 12:39:23 »
hi all , i bought a 2.2 manual cdx ( Z22XE ) back in october , had the usual rocker cover gasket to sort out straight away , just started drinking coolant which i think is the valve at the back of the engine ( which im waiting for delivery ) . i decided to do a left hand only service yesterday ( my right shoulder is buggered so im currently off work ) when finished i had a good look around for oil leaks and found what seems to be a very small leak comming from the bell housing joint and running down and dripping of the passenger side lower stud . i cant see it coming from anywhere further up the block which has me leaning towards rear crankshaft seal ? its only very minute and just looks like a gold piece of cotton running down the housing joint and there are certanly no clutch issues ... im having to use my omega for a everyday jalop atm even tho my plan was to garage it and only bring it out to play in the summer . i have 3 vauxhalls ,, corsa B 1.0 ( which we are still working on the MOT emmisions , supposed to be my everyday car ) and also a astra DT estate which is in the middle of a full strip and rebuild ... the omega is running great only other small issues are when starting from cold i have to give the exhaust time to heat up and seal the tiny hole up at exhaust to manifold joint ( i know this is a sign of something worse but i did the cat just over a month ago and had to re use the old gasket with paste and noticed a small leak ) anyway once the exhaust has expanded and sealed the leak after a restart the engine runs sweet i have now got new gasket and will be fitting during the week . . and a lower ball joint , ive got 2 replacements but have the fun of drilling the studs out on the old ones .. thanks for reading ... richard

Pages: [1]

Page created in 0.009 seconds with 16 queries.