31
Omega General Help / Re: rear camber/toe in.
« on: 18 December 2012, 08:35:30 »I can see the use of two bolts and spring washers per bush on the rubber bushes, but why the two nuts, and only two lock washers on the poly ones Mike, do you know?
And is that ac spannertap round with a hammer and punch adjustment?
Basically, the long bolt bottoms out in the centre bar and has a lock nut fitted. With the lock nut undone (and the bolt the other side slackened off) you can then use a spanner to turn the long bolt (clockwise) as it is bottomed out. Once in the right place, tighten up the lock nut and the short bolt the other side.
For clarity, the poly version is only recommended for use where there is NO toe control link. If you have a toe control link, then we recommend the use of the rubber version.
Roger (Michael is away today)