Topic: My Steinmetz Omega (Read 11162 times)

DaVePGN · « **on:** 23 July 2010, 20:18:29 »

Hi OOF maniacs

Here's my car. It's my 2nd Omega. It's '99 Y22XE

The car is still a work in progress project. I'm going to put 4.22 LSD in it soon.

spud1990 · « **Reply #1 on:** 23 July 2010, 21:24:02 »

like the car mate comming along keep up with the pics take a look at my estate on hear. i prefer estats ss they stand out in the croud

serek · « **Reply #2 on:** 23 July 2010, 22:44:09 »

welcome on OOF Dave

nice motor by the way

DaVePGN · « **Reply #3 on:** 24 July 2010, 01:49:53 »

Quote

welcome on OOF Dave

Hi serek here as well

Here's new photos from tonite's wheel change

Recently I've bought some ST gimmicks and ordered body trim stripes 4 the Omega.

Plomien · « **Reply #4 on:** 24 July 2010, 08:08:49 »

Nice looking car

where in Poland are you from?

PhilRich · « **Reply #5 on:** 24 July 2010, 19:28:40 »

That is an exceptionally lovely looking car! You Poles really do look after your wheels

zvi · « **Reply #6 on:** 25 July 2010, 15:05:45 »

nice color fit

serek · « **Reply #7 on:** 25 July 2010, 21:47:07 »

Quote

Quote
welcome on OOF Dave
Hi serek here as well

Here's new photos from tonite's wheel change

Recently I've bought some ST gimmicks and ordered body trim stripes 4 the Omega.

nice wheels 8-)where you got them from?? now I need to check if my set is still in garden

DaVePGN · « **Reply #8 on:** 25 July 2010, 23:03:25 »

Quote

where you got them from?? now I need to check if my set is still in garden

Well... I've done about 2,5k km to get them, so... better check ur garden

BTW, i haven't seen you are car here so far...

serek · « **Reply #9 on:** 25 July 2010, 23:31:28 »

Quote

Quote
where you got them from?? now I need to check if my set is still in garden
Well... I've done about 2,5k km to get them, so... better check you are garden
BTW, i haven't seen you are car here so far...

my set still in garden

I show my motor last year on here
http://www.omegaowners.com/forum/YaBB.pl?num=1251643510/15

DaVePGN · « **Reply #10 on:** 06 September 2010, 22:32:59 »

A little mess before national meeting

spud1990 · « **Reply #11 on:** 07 September 2010, 19:46:57 »

what are you doing to your ride??

DaVePGN · « **Reply #12 on:** 07 September 2010, 23:55:40 »

Quote

what are you doing to your ride??

You know, a little bit of this, a little bit of that

mostly I had to get rid of water inside of the car (stupid carsprayer).

I have 4.22 LSD already waiting to mount on as well as lower springs 30/30 - they'll go onto as soon, as I finish putting all interior parts together. Some more photos

but grill is goin to my mate in UK

mh_trigger · « **Reply #13 on:** 08 September 2010, 00:08:12 »

Good times!

DaVePGN · « **Reply #14 on:** 11 September 2010, 22:26:03 »

Steimi got lower today.
Before

After

But car is completely empty inside, so it will get little bit lower I think.

spud1990 · « **Reply #15 on:** 12 September 2010, 08:51:47 »

it will take a about a week 4 the springs 2 settle. it will go lower 2

Webby the Bear · « **Reply #16 on:** 13 September 2010, 22:57:48 »

love it mate

DaVePGN · « **Reply #17 on:** 14 September 2010, 00:21:08 »

At front it's 65,5cm from the ground at the moment & 67,5cm at the back>>

dervdoc · « **Reply #18 on:** 15 September 2010, 11:44:02 »

really liking this yolk! some time and effort envolved

DaVePGN · « **Reply #19 on:** 19 September 2010, 21:24:34 »

This is how it looks on new springs

serek · « **Reply #20 on:** 19 September 2010, 21:53:39 »

come on Dave post some more photo 8-) bigger ones please
your motor look really good on this set up

Broomies Mate · « **Reply #21 on:** 19 September 2010, 22:20:04 »

Not my cup of tea, but each to their own.

I'm just glad that a Mig is being looked after and loved.

DaVePGN · « **Reply #22 on:** 19 September 2010, 23:14:09 »

Quote

come on Dave post some more photo 8-) bigger ones please

Steimi needs first a little bit more touch 'coz it hasn't been waxed since painting. Time will come, there's gonna be more photos

DodgeyDave · « **Reply #23 on:** 23 September 2010, 17:04:32 »

Lovely car, paint job looks great

DaVePGN · « **Reply #24 on:** 26 September 2010, 22:45:55 »

Some new shoots at the airfield

squattingbeaver · « **Reply #25 on:** 28 September 2010, 23:16:50 »

Looking very nice, love the tweaks you have made.

belairbob · « **Reply #26 on:** 29 September 2010, 20:07:29 »

LOVE THE PAINT JOB !!!!! NICE CAR

DaVePGN · « **Reply #27 on:** 06 October 2010, 21:52:33 »

Finally, first movie with LSD on http://www.youtube.com/watch?v=du9H_m8h6lc

DaVePGN · « **Reply #28 on:** 22 January 2012, 21:03:10 »

Some photos from Drift Day

Couple more nice pics

And couple more mods are comin soon

+ Steinmetz rear lip and Steinmetz side skirts

x25dt · « **Reply #29 on:** 23 January 2012, 12:10:48 »

nice

top stuff

pirate · « **Reply #30 on:** 23 January 2012, 19:41:05 »

bet my steinmetz is lower than yours,lol .mine out of the paint shop wedsday i hope,is yours lowered on e-bach springs ?
now its alot stiffer its much easyier to get the back out to drift not that i get much chance apart from santa pod.
but it now goes round the corners without me praying.
pictures later in the week ,
ps was hopeing to gloss black wrap the roof but not sure i want to take the roof rails of to, do real hassle,

twiglet · « **Reply #31 on:** 23 January 2012, 20:59:27 »

Quote from: pirate on 23 January 2012, 19:41:05

bet my steinmetz is lower than yours,lol .mine out of the paint shop wedsday i hope,is yours lowered on e-bach springs ?
now its alot stiffer its much easyier to get the back out to drift not that i get much chance apart from santa pod.
but it now goes round the corners without me praying.
pictures later in the week ,
ps was hopeing to gloss black wrap the roof but not sure i want to take the roof rails of to, do real hassle,

Not a bad job to do, just a little time consuming.

DaVePGN · « **Reply #32 on:** 24 January 2012, 11:27:26 »

Quote from: pirate on 23 January 2012, 19:41:05

is yours lowered on e-bach springs ?

I have Weitec suspension - springs 'n' shocks - all new. Later there's gonna come also strut bar.

Quote from: pirate on 23 January 2012, 19:41:05

now its alot stiffer its much easyier to get the back out to drift not that i get much chance apart from santa pod.

Have You tried 100% LSD?

It goes like this >> http://www.youtube.com/watch?v=2IKYDsGgdAo

MV6Danny · « **Reply #33 on:** 25 January 2012, 02:22:11 »

Nice video. I think i need a lsd for my mv6

Car looks cool too.

Reefpotato · « **Reply #34 on:** 25 January 2012, 17:08:04 »

Good Job

though I must tell you the steering wheel is on the wrong side, oops

Nice apart from that !!!

DaVePGN · « **Reply #35 on:** 07 February 2012, 00:48:46 »

Quote from: MV6Danny on 25 January 2012, 02:22:11

Car looks cool too.

Finally I got myself original STZ sideskirts too. I've seen here somewhere You got them as well. After winter I'm gonna put them on.

sax-p · « **Reply #36 on:** 12 February 2012, 20:14:55 »

Love the car, you'll burn the tires right off the rim.

BTW, where did you get the angel headlights, looking for ages for a set.

serek · « **Reply #37 on:** 12 February 2012, 21:07:20 »

Quote from: sax-p on 12 February 2012, 20:14:55

Love the car, you'll burn the tires right off the rim.

BTW, where did you get the angel headlights, looking for ages for a set.

drop him Pm
hi is good boy sometimes so maybe will share some info about it

DaVePGN · « **Reply #38 on:** 12 February 2012, 21:34:51 »

Quote from: sax-p on 12 February 2012, 20:14:55

Love the car, you'll burn the tires right off the rim.

BTW, where did you get the angel headlights, looking for ages for a set.

That's not crappy angel eyes, but original xenon modified with bmw projectors - all that makes bixenon in my Omega

it really does the job

Projectors from BMW are bigger. I can sort out one set for You if You'd like - serek is taking trip to me in March, so distance really it's not a problem, mate

Don't be worry about tires - I have plenty of them, as well as rims, recently I've managed to buy additional 2 Steinmetz 17'' alloys in case something went wrong with mine.

andrzej3108 · « **Reply #39 on:** 10 August 2012, 16:40:00 »

I wondered who might be "My Steinmetz Omega"
hi DaVe

News:

Author Topic: My Steinmetz Omega (Read 11162 times)