Omega Help Area > Omega General Help

Brake pipe connectors

(1/2) > >>

addy:
Would anyone, have the correct sizes I need for the brake line fittings, on the ABS pump and the one that goes to the flexi joint, on the front of a 2002 2.6 omega. I have found the brake line 3/16" 4.75mm. I am wanting to replace the front brake lines from the ABS pump to the flexi pipe.

Thanks in advance for any help.

Nick W:
Just ask for metric ones. Enough to replace everything on the car and leave some spares should give change from a fiver.




They're M10x1 if you want to make things complicated.....

addy:
Thanks Nick W for the quick reply. Sorry to sound stupid, but is that the same size as used on the ABS brake line fittings aswell?

Thanks again.

dave the builder:
I'd imagine the original fittings that screw into the ABS unit will be fine ,
once you've replaced the hard lines and swaged them on the pipes . 

cam.in.head:
yes the original pipes down to the abs unit rarely rust .and also as a plus point if you dont have to disconnect the abs block input and do the pipes one at a time theres less chance of having problems bleeding it. ive heard some people say you need to connect it to a tech unit to open the valves( may have misunderstood ) but at  you wont have to if you dont need to !

Navigation

[0] Message Index

[#] Next page