Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Cliffo B on 06 April 2012, 16:43:35
-
Just gone to replace miggy's front H/light sensor with new PNo VOO93165414
Recently ordered through AndyC
Seems there's a problem which is:-
The new sensor has a different connector
An updated male connector comes with the kit
However the 3 feed wires comeing from the new male connector are different colours to the wires feeding the old sensor
The diagram that comes with the kit shows a simple cut/join with no identifiers/indicators
The new connector update Terminal No 1 is Grey
No 2 is not used
No 3 is not used
No 4 is Black
No 5 is Red
No 6 is not used
Miggy's 3 loom wires are Brown/white Tracer
Brown/Red Tracer
Black/Brown Tracer
I'm now at a loss how to connect the wires
Can anyone kindly help or has done this job before?
Thanks :y
-
Recheck your wiring you may find it's grey not white. The colours listed on the new switch relate to the trace colours on the old wiring.
-
Thanks a lot Doz :y :y
A sort of logic there
Looks like jobs a good un
Least the fault display's gone ;D ;D
For the record colour is grey not white :-[