1
Omega Electrical and Audio Help / Re: NCDC 2013
« on: 01 June 2010, 23:40:33 »
and how do you de-pair?
- 27 April 2024, 19:32:14
- Welcome, Guest
News:
Please check the Forum Guidelines at the top of the Newbie section
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Omega Electrical and Audio Help / Re: NCDC 2013
« on: 01 June 2010, 23:33:46 »
so these are worthless really
3
Omega Electrical and Audio Help / Re: NCDC 2013
« on: 01 June 2010, 23:09:25 »
cheers.
But if they sell together screen and stereo as a pair would it then work?
But if they sell together screen and stereo as a pair would it then work?
4
Omega Electrical and Audio Help / NCDC 2013
« on: 01 June 2010, 23:00:12 »
Just breaking an elite with this in and looking at it does it have sat nav? What kind of money do they bring are they any good? Do they fit in vectra`s?
5
Omega General Help / Re: Removal of 'vauxhall' lettering
« on: 01 August 2010, 18:20:17 »
An old bank card so you dont scratch the paint while pouring hot water over then to loosen the glue
6
Omega General Help / Re: Dirver side mirror fitting
« on: 01 August 2010, 19:33:43 »
As you have put pull the inside trim off x3 phillips screws unplug old unit and reverse process 10min job
7
Omega General Help / Re: x30xe starter motor removal
« on: 01 August 2010, 18:22:29 »
Get car on axle stand and use trolley jack under sump with a bit of wood and undo the 4 15mm bolts to take bracket from the block and i think the engine mount bolts are 16mm
8
Omega General Help / Re: Facelift door mouldings removal?
« on: 01 August 2010, 18:17:22 »
Think the torx is a T25
9
Omega General Help / Re: Facelift door mouldings removal?
« on: 01 August 2010, 13:08:27 »
or if you on about the ones on the door outer you will need a 10mm socket or spanner for the front indicator mouldings and a Torx for the door mouldings one at each end then slide the trim to get it off.
10
Omega General Help / Re: ABS Sensor Part Number
« on: 27 July 2010, 00:33:48 »
why do you need that too brian?
11
Omega General Help / Re: Vented rear discs?
« on: 07 June 2010, 20:24:29 »Quote
did'nt know they went ventedGuess we learn something new every day- But is there any point? Can't see much need for them on a luxo barge :-/
12
Omega General Help / Re: Vented rear discs?
« on: 07 June 2010, 20:03:26 »
Is there any advantage from this ?
13
Omega General Help / Re: Vented rear discs?
« on: 07 June 2010, 19:57:21 »
But ive defo seen a 2.6 CD with vented rears thats what made me ask this question
14
Omega General Help / Vented rear discs?
« on: 07 June 2010, 19:52:10 »
Which model had vented rear discs? I have a face lift elite on a Wreg 2000 and this has solid rears
15
Omega General Help / Elite/Prodrive spoiler
« on: 03 June 2010, 16:47:16 »
Do all omega`s have spoilers on the boot(saloon) only im stripping one and just had the boot open and noticed it said prodrive in it, Is this an after market mod or std feature?
cheers
cheers