Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: annihilator on 26 August 2017, 20:19:11
-
I've got a pair of unrusty rear doors to fit onto the Tourer which as standard has keep kit rear windows and my question is does the loom that comes from the b pillar/sill area have the extra wires to allow electric operation if used with the correct console and door switches?
Thanks John.
-
If your new doors are complete, then should be plug and play on the earlier cars :y
Pop the plug out of the b pillar to be sure...
-
Retrofitted electric windows to a 94 saloon last year which had manual windows all around. All the Wiring was already in place. Just needed the door looms and motors/switches.
-
Cheers guys will suck it and see :D
John
-
Finally got round to this and it is indeed plug and play providing of course you fit the relevant fuse which I did eventually after a bit of head scratching :D
John