Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[BazaJT]

That's exactly like my dash cluster,sometimes worked other times not.car's been parked in garage for a couple of years or so and if I remember rightly the rev counter needle is sat pointing at about 500revs or so.Other more important things to fix on the car first[when I can work up the enthusiasm to bother] then I'll worry about cluster.

[dave the builder]

I have an 8lb sledge hammer ,that will fix it!!

You'd have to hit it at least twice
if not two and a half times 

[cam.in.head]

the issue which affected mine also killed the fuel and temp guages . the speedo and tacho froze at any given position. swapping the cluster did solve the issue BUT i slso wanted to mend the fault on the original cluster and refit it . i found the fault on mine was the double layer pcb board linking eyelets failing fue to the immense geat that the area behind the cluster attracts !
if you can remove this yourself you may find that a few of them are noticeably black / burnt. you can then link them out yourself if you are able to . its not too micro surgery but can be done easily.
or send it off to a repair place and hope they find / fix them

[TheBoy]

Hello, interesting, what is this "Reseating Cluster", how to do this?

Ideally remove, clean the contacts, and reinstall - there is a guide over in the guides section.

Or put your bit of hand between palm and wrist on the right side of the speedo and firmly press suddenly - if the panel has started to work out, you'll feel it reseat.

[polilara]

Thanks, I read first "reset", so a bit misunderstanding, now clear.

[Webby the Bear]

Thanks for all your help boyos. I’ve just fixed monster exhaust leak between cat and centre on the OS. So now I can turn my attention to this. It actually started working normally on Christmas Day. And not it’s back to no speedo and a vibrating rev counter 🤣🤣🤣
I’ll defo try cleaning contacts and reseating connections 🙏🙏🙏😃😃😃

Thanks all for your help.

Ps had an obnoxious exhaust for couple weeks now. I actually enjoyed it and I’ve never been in to go faster parts 🤣🤣🤣 but do love the quietness now it’s sorted 🙏🙏🙏

[Doctor Gollum]

Check for further damage as some pokey scrote may have taken a fancy to the cats but been disturbed before they could finish the job

[STEMO]

Check for further damage as some pokey scrote may have taken a fancy to the cats but been disturbed before they could finish the job

Yeah, pokey scrotes 

[Webby the Bear]

Ps guys while I’m messing around with these little annoying faults… the passenger front door doesn’t lock or unlock via the central locking. As I’ve got a bit of time…
is it likely it’ll be the latch/motor assembly? And more to the point the micro switch in the motor as per this guide…

https://www.omegaowners.com/forum/index.php?topic=90642.0

Cheers guys 🥰🥰🥰

[Doctor Gollum]

Ps guys while I’m messing around with these little annoying faults… the passenger front door doesn’t lock or unlock via the central locking. As I’ve got a bit of time…
is it likely it’ll be the latch/motor assembly? And more to the point the micro switch in the motor as per this guide…

https://www.omegaowners.com/forum/index.php?topic=90642.0

Cheers guys 🥰🥰🥰

Almost certainly the cl solenoid 

[Webby the Bear]

Ps guys while I’m messing around with these little annoying faults… the passenger front door doesn’t lock or unlock via the central locking. As I’ve got a bit of time…
is it likely it’ll be the latch/motor assembly? And more to the point the micro switch in the motor as per this guide…

https://www.omegaowners.com/forum/index.php?topic=90642.0

Cheers guys 🥰🥰🥰

Thanks DG. The solenoid being part of the latch and motor assembly?
Almost certainly the cl solenoid 

[Doctor Gollum]

There's a guide, but yup, held onto the latch by two screws... Once you've removed the latch

[Webby the Bear]

Great stuff thanks mate. If it’s not repairable best off eBay for 2nd hand one?

[Doctor Gollum]

I would suggest buying a second hand one, replacing the switches then swapping it in

Just remember that the front and rear ones are different

Oh, and while you have the latch out clean the mechansim with brake cleaner and then oil it with 3in1 or similar 

[Webby the Bear]

Awesome cheers DG much appreciated 🥰🥰🥰🥰