Topic: Alternator Problem?? (Read 4782 times)

Doctor Gollum · « **Reply #15 on:** 06 August 2021, 16:23:33 »

Quote from: Dave G on 06 August 2021, 16:04:51

I’m using an old torque wrench on a socket, so plenty of leverage. Good info about the drilling. I’ll check that out as it will save my wife pushing the bar while I struggle with the belt!

As always, thanks for your help.
Cheers.

You could use a ten foot scaffold pole, if you aren't rotating the tensioner far enough the belt will never fit

Dave G · « **Reply #16 on:** 07 August 2021, 14:02:44 »

All sorted now. Charging to about 14.8V so I'm OK with that. Even with a 2030mm belt it was a struggle to get on, but there's still movement in the tensioner so it's not 'over-tight'.

As always - thanks to all who helped me out with advice and suggestions.

Cheers

News:

Author Topic: Alternator Problem?? (Read 4782 times)

Doctor Gollum

Re: Alternator Problem??

Dave G

Re: Alternator Problem??