Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: annihilator on 12 September 2018, 17:42:35

Title: Short nose vs long
Post by: annihilator on 12 September 2018, 17:42:35
I've noticed my '95 elite 3.0 has a short nose plenum and I think the later ones have long nose versions. Apart from the obvious what's the difference.
Title: Re: Short nose vs long
Post by: tunnie on 12 September 2018, 17:48:53
Better breathing, recall 2.6 would have been better with short. But due to DBW it has to go long.

Fuse19 will explain better   :)
Title: Re: Short nose vs long
Post by: Doctor Gollum on 12 September 2018, 18:18:23
I've noticed my '95 elite 3.0 has a short nose plenum and I think the later ones have long nose versions. Apart from the obvious what's the difference.
I believe that it's covered in the Multiram guide in faqs ;)

If considering a swap, you'll need the longer throttle cable and possibly some of the egr/sai gubbins...
Title: Re: Short nose vs long
Post by: annihilator on 12 September 2018, 21:40:48
Found this on the old site
http://oldsite.omegaowners.com/forum/YaBB.pl?num=1156774455/all
Too little difference to bother about.
Title: Re: Short nose vs long
Post by: Doctor Gollum on 12 September 2018, 22:42:26
http://www.omegaowners.com/forum/index.php?topic=90513.0 :y
Title: Re: Short nose vs long
Post by: annihilator on 13 September 2018, 07:35:54
Thanks
Title: Re: Short nose vs long
Post by: zirk on 13 September 2018, 19:08:15
A tad more torque on the Long Nose at low RPM, assuming the Multi Rams are working correctly.
Title: Re: Short nose vs long
Post by: tigers_gonads on 13 September 2018, 19:11:14
I stuck a long nose on a 2.5 once because I thought it would be a good idea  ;
After all the fannying around, it felt slower  ::)