Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

46

Omega General Help / Re: Front Brake Kit Spare Part Number

« on: 26 August 2023, 10:33:39 »

Thanks Enceladus
It was a Finnish Market Place in net. Got them today, seems to be original GM package including those two boxes. They look similar to what I have in my car, those part numbers I do not know as there was not any part numbers in opel.7zap.com.

47

Omega General Help / Front Brake Kit Spare Part Number

« on: 18 August 2023, 17:19:39 »

 I could buy front brake kit 1515005, 93175466 by 30 euro but not sure if it fits to my 2001 Y26SE

W0L0VBM6911079201

So many possibilities, ambulance police etc. Air cooled, yes, but seem to be various diameters etc., so expensive, don't want to take a risk...

48

Omega General Help / Re: Codes 0130 and 0150

« on: 09 August 2023, 16:04:06 »

Old case but want to report back, after one year "thinking" decided to change O2 sensors 1 to both bank1 and bank 2. Now they are dancing "in synchronization" as  well as the trims.
So it was as advised here..., thanks a lot! But better to think first before using your money.

49

General Car Chat / Re: So what have you done to your car today?

« on: 23 July 2023, 12:14:25 »

Changed rear pads and discs to Astra J. Daughter came and said that she hear some "rasping" somewhere.

50

Omega General Help / Re: Disc back plate

« on: 23 July 2023, 08:24:41 »

Assuming I  have correct numbers really difficult to find. I remeber some years ago rear plates were available from Germany (someone started re-production of them). Don't remember the name of that company but ordered one rear plate from them. Does anybody know whether they produced also front plates.

51

General Car Chat / Best Audi Forum

« on: 21 July 2023, 14:40:43 »

https://www.audiownersclub.com/forums/topic/24032-a4-2006-30-tdi-150kw-big-bang-in-gcx-gearbox/
Looking for Best (really tecnical) forum like OOF, do anybody know in U.K or anywhere. Tried two ones but not very fruitful. Looking for help to my friend, I'm still happy wth my Omega.

52

Omega General Help / Re: Lambda 1&2 Spare Numbers for V6 Y26SE

« on: 16 July 2023, 10:26:19 »

So, once again, is the part in my first message here sensor 1 or sensor 2? Is B before something and A after or what these Alphabets mean?

53

Omega Electrical and Audio Help / Re: Where to buy 26SE 246 Coilpack

« on: 14 July 2023, 20:42:53 »

When idling roughly unplugging MAF does not change situation. Have to check. trims and others live data

54

Omega Electrical and Audio Help / Re: Where to buy 26SE 246 Coilpack

« on: 09 July 2023, 16:46:39 »

Thanks DG, I report after fortnight, now far away from the Omega.

55

Omega Electrical and Audio Help / Re: Where to buy 26SE 246 Coilpack

« on: 09 July 2023, 14:56:11 »

This starts to be too difficult for me, please help!:
2-4-6 (bank 2) camcover seal changed. New Bosch Coilpack installed. All six plugs changed, original.
Starts perfectly runs  perfectly 150km/h and idles well when cold. When getting warm still runs perfectly but has rough idling and engine light blinking. Get codes 130 and 150. After codes cleared no codes after driving when engine immediately stopped. But if let idling after a couple of seconds rough idling, blinking engine light and codes 130 and 150. If let it idle 3 minutes also misfire 2-4-6, 302 304 306. What is going on? MAF? Difficult to think that bank 1 and bank 2 first O2 sensors  fault at the same time.
Furthermore, when rough idling and engine light blinking when I put in neutral 3000rpm the engine light stops blinking, goes off. MAF? Please help. Can get live data, I remember B1S1 and B2S1 are more or less frozen when idling rough.

56

Omega General Help / Re: Plenum to Intake Bridge Torque?

« on: 05 July 2023, 15:26:31 »

Thanks, 8Nm,  not very high value.

57

Omega General Help / Plenum to Intake Bridge Torque?

« on: 03 July 2023, 17:15:20 »

Didn't find it here, guess it's 20Nm. Usually I overtight everythng...

https://www.omegaowners.com/forum/index.php?topic=90519.0

58

Omega Electrical and Audio Help / Re: Where to buy 26SE 246 Coilpack

« on: 28 June 2023, 18:06:53 »

Sure, I take care of the earthing. However, it was time to change spark plugs so I found wells 4 and 6 full of oil. Wells 1, 3, 5 and 2 were dry. I took cam cover away and will change gasget soon. Cover not warped. Aluminium cover preferred if someone have those avaolable. Ordered also coil pack 246 and found leaking HBV so good to be there sometimes...

59

Omega Electrical and Audio Help / Where to buy 26SE 246 Coilpack

« on: 27 June 2023, 15:25:09 »

So, this time codes 300, 302, 304, 306, rough sometimes, perhaps coilpack to be changed. When clearing codes yesterday found ECU voltage only 11.2V while battery around 14 as charging is ok. Ground connectors in frame below battery are green and white, very corroded. They might not cause this 2-4-6 problem.

Should ECU Voltage be same as Bat Voltage?
Where to order Coilpacks from and which trades are recommendable, Bosch, Beru...? Found from Autodoc several possibilities.

60

Omega General Help / Re: Y26SE Leaking Cooling Liquid below Left Head...

« on: 21 March 2023, 18:56:34 »

Seems I forgot to tighten that hose 10 years ago. After tightening no leakage even in 16psi.