Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TheBoy]

Do you think a tech 2 session will sort it out? :-?

Depends on the idiot holding the device...

[Ryan Hegarty]

Shame you are overseas, as this is one of those instances where I really would advise anyone to come to me, despite distance, to fix 

That's what I was thinking too, from the reputation you have on here, I know that you're the man that could sort it out.

[VXL V6]

Shame you are overseas, as this is one of those instances where I really would advise anyone to come to me, despite distance, to fix 

That's what I was thinking too, from the reputation you have on here, I know that you're the man that could sort it out.

What about sending the HU and Screen to TB (packed very well of course!)

[Elitenut]

I've just read Ryan's thread "NCDC 2013 Radio Safe" with great interest as I'm getting the same fault.
Mine started Last week after trying to remove the stuck cdc magazine by banging on the dashboard.
I have tried to get the fault codes off the system with a cheap "My Naff Code Reader".
NCDC 2013
00052 - EEPROM Not Programmed _ Present.
00191 - CAN-Bus Max.- Config.- List not Complete _ Not present.
00199 - CAN-Bus no Communication Telematik Unit _ Present.
CDC
00062 - Replace Electronic Control Unit (ECU) _ Present.
00063 - CD-Changer Magazine Malfunction _ Present.
The "My Naff Code Reader" goes into error when reading the NCDC 2013 after its first read.
The Radio does work if I switch it off and then on selecting the tuner, if I select Nav. it goes into Radio Safe Mode.
If its possible to fix up a tech 2 session with TB, it might help both of us.

[TheBoy]

I'd avoid doing anything with "My Naff Code Reader" with NCDCs, they corrupt the hell out of the programming.

Seeing as "My Naff Code Reader" was never sold in the UK, I suspect you will get sod all help from the UK distributer...

[Ryan Hegarty]

I've just read Ryan's thread "NCDC 2013 Radio Safe" with great interest as I'm getting the same fault.
Mine started Last week after trying to remove the stuck cdc magazine by banging on the dashboard.
I have tried to get the fault codes off the system with a cheap "My Naff Code Reader".
NCDC 2013
00052 - EEPROM Not Programmed _ Present.
00191 - CAN-Bus Max.- Config.- List not Complete _ Not present.
00199 - CAN-Bus no Communication Telematik Unit _ Present.
CDC
00062 - Replace Electronic Control Unit (ECU) _ Present.
00063 - CD-Changer Magazine Malfunction _ Present.
The "My Naff Code Reader" goes into error when reading the NCDC 2013 after its first read.
The Radio does work if I switch it off and then on selecting the tuner, if I select Nav. it goes into Radio Safe Mode.
If its possible to fix up a tech 2 session with TB, it might help both of us.

I'm trying to get this problem sorted with the local dealer and will try to get it done this week - I will let you know what the outcome is, (fingers crossed)

[TheBoy]

We are trying to meet up when we are both available...